A theoretical study of cavity chamber correction factors for photon beam absorbed dose determination

Abstract

Theoretical expressions have been derived for the contributions to ionisation density in cavity chambers from secondary electrons arising from photon absorption in wall, build-up cap and surrounding medium. The method allows the derivation of C lambda and displacement factors, which are evaluated for the Farmer graphite chamber for a range of photon beams. Differences between C lambda values calculated for air-walled and water-walled chambers are found to be consistent with those determined by Nahum and Greening. The currently recommended displacement factor for the Farmer chamber with cap, however, is found to be in error by about 0.8%. On the basis of a comparison between theoretically predicted air doses in cavities and the experimental results of Fregene it is proposed that no further correction to C lambda is required for the chamber 'effective point of measurement'.

Use of the FBX dosemeter for the calibration of cobalt-60 and high-energy teletherapy machines

“…There are some discrepancies in the C, and CE values (Nahum and Greening 1976, Nahum 1978, Williams 1977, Holt and Kesaris 1977, Almond and Svensson 1977, Fregene 1978. These values depend whether the wall of the chamber is water-equivalent or air-equivalent (McEwan 1980).…”