A Smart Voltage and Current Monitoring System for Three Phase Inverters Using an Android Smartphone Application

Abstract

In this paper, a new smart voltage and current monitoring system (SVCMS) technique is proposed. It monitors a three phase electrical system using an Arduino platform as a microcontroller to read the voltage and current from sensors and then wirelessly send the measured data to monitor the results using a new Android application. The integrated SVCMS design uses an Arduino Nano V3.0 as the microcontroller to measure the results from three voltage and three current sensors and then send this data, after calculation, to the Android smartphone device of an end user using Bluetooth HC-05. The Arduino Nano V3.0 controller and Bluetooth HC-05 are a cheap microcontroller and wireless device, respectively. The new Android smartphone application that monitors the voltage and current measurements uses the open source MIT App Inventor 2 software. It allows for monitoring some elementary fundamental voltage power quality properties. An effort has been made to investigate what is possible using available off-the-shelf components and open source software.

RETRACTED: Analysis of voltage and current magnification in resonant circuits on hyperspectral signal processing

“…Hyperspectral data stored in a three-dimensional (3D) matrix or in an hsimage object are typically in his format, which means that the first dimension is the lines (rows) of the image, the second dimension is the samples (columns), and the third is the spectral bands. 4 Thus, if X contains his data, X (1,2,3) is the third spectral band in the second sample in the first line. 5 Data in vector format are one or more (spectral) vectors in a two-dimensional (2D matrix.…”

Energy efficiency in discrete-manufacturing systems: Insights, trends, and control strategies

“…In addition, some industries integrate vibration sensors in order to analyze and predict possible equipment malfunctions, which increase their energy consumption. From these sensors is possible monitoring the phase-phase voltage, phase to neutral voltage, phase current, frequency, active power, reactive power, apparent power, active energy, reactive energy, power factor, instantaneous demand amps, instantaneous demand active power, instantaneous demand apparent power, maximum demand active power and maximum demand apparent power [120,121].…”

Development and Calibration of an Open Source, Low-Cost Power Smart Meter Prototype for PV Household-Prosumers

“…This section assesses the state of the art regarding prototypes of power smart meters for households. Depending on the support platform, these prototypes can be classified as follows: (i) Arduino open-source platform [3,7,14,[43][44][45][46][47][48][49][50][51][52][53][54][55][56][57], (ii) field-programmable gate array (FPGA) technology [4,41], (iii) Lopy [5], and (iv) others [6,8,51,52].…”