A simplified mathematical model for power output predicting of Building Integrated Photovoltaic under partial shading conditions

Zhu, Li; Li, Qingxiang; Chen, Mengdong; Cao, Kai-Yue; Sun, Yong

doi:10.1016/j.enconman.2018.11.036

Cited by 59 publications

(12 citation statements)

References 35 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…1, the first stage is the DC/DC boost converter while the second stage is the three-phase DC/AC inverter. The PV system has been modeled in MATLAB/SIMULINK software using the equations explained in [24], [25], and also the overall power flow through it can be expressed as follows [26]:…”

Section: Grid Fault Impacts On the Hybrid Power Systemmentioning

confidence: 99%

Optimal Shunt-Resonance Fault Current Limiter for Transient Stability Enhancement of a Grid-Connected Hybrid PV/Wind Power System

et al. 2021

View full text Add to dashboard Cite

This paper proposes an optimal design of Shunt-Resonance Fault Current Limiter (SRFCL) to enhance the Fault Ride-Through (FRT) capability and improve the transient stability of a grid-connected hybrid PV/wind power system. The design parameters of the SRFCL are optimized by using Particle Swarm Optimization (PSO) technique. The proposed SRFCL topology is designed in such a way that it can provide superior protection capability for limiting the fault current and supporting the grid voltage than the conventional Bridge Fault Current Limiter (BFCL). The effectiveness of the SRFCL in supporting the dynamic performance and improving the transient stability of the hybrid energy system is validated during both symmetrical and unsymmetrical faults in the electrical utility. Moreover, its credibility is evaluated compared with that of the BFCL and the FRT control schemes. Simulations have been performed using the MATLAB/SIMULINK software. The results illustrate that the proposed SRFCL augments significantly the dynamic behavior and the transient stability of the hybrid power system during the fault events. Also, when the optimal SRFCL is employed, the injected active power by the hybrid system and the grid voltage profile are improved considerably under the grid disturbances. Furthermore, the comparison confirms the superiority of the SRFCL performance to both the BFCL topology and the FRT control scheme in every aspect.

show abstract

Section: Grid Fault Impacts On the Hybrid Power Systemmentioning

confidence: 99%

Optimal Shunt-Resonance Fault Current Limiter for Transient Stability Enhancement of a Grid-Connected Hybrid PV/Wind Power System

et al. 2021

View full text Add to dashboard Cite

show abstract

“…SunPower SPR-305-WHT PV panel with a maximum power of 305.23 W is employed for this work [22]. Figure 2 shows the equivalent circuit of the PV system and the corresponding Current-Voltage (I-V) characteristics can be expressed as follows [23]:…”

Section: Pv System Modelmentioning

confidence: 99%

Modified STATCOM control strategy for fault ride-through capability enhancement of grid-connected PV/wind hybrid power system during voltage sag

2020

View full text Add to dashboard Cite

This paper proposes the employment of Static Synchronous Compensator (STATCOM) in reactive power compensation to enhance the Fault Ride-Through (FRT) capability and improve the dynamic performance of a grid-connected PV/wind hybrid power system during the transient grid disturbances. The hybrid power system consisting of 9 MW Doubly Fed Induction Generator (DFIG)-based wind farm and 1 MW PV station is integrated with 100 MVAR STATCOM at the Point of Common Coupling (PCC) bus. The dynamic performance of the PV/wind hybrid power system with the proposed STAT-COM controller is analyzed and compared with another FRT control strategy during a grid voltage sag. The FRT control strategy is based on the injection of reactive power from the hybrid system to enhance the FRT capability during the grid faults, and also activation of the outer crowbar protection system to protect the DFIG. On the other hand, the proposed STATCOM controller adjusts the PCC bus voltage during the grid disturbances by dynamically controlling the amount of reactive power injected to or absorbed from the electrical grid. Modeling and simulation of the proposed hybrid power system have been implemented using MATLAB/SIMULINK software. The effectiveness of both the proposed STATCOM controller and the FRT control strategy is evaluated during a 50% grid voltage sag. The simulation results illustrate that the STATCOM controller decreases significantly the level of voltage drop during the voltage sag, maintains the injected active power from the PV station at its rated value, and protects effectively the PV DC-link voltage from overvoltage. Moreover, when the STATCOM controller is employed, the injected active power from the wind farm is improved considerably and the oscillations of the DFIG rotor speed are reduced efficiently during the fault. Furthermore, the comparison confirms the superior dynamic performance of the STATCOM controller in enhancement the FRT capability as compared with the FRT control strategy.

show abstract

“…Table 3 summarizes the specification of the Sanyo PV module and the rest of the detailed specifications are available in [14]. The modeling of the PV module is implemented using the equations described in [15]. Also, the current-voltage (I-V) and the power-voltage (P-V) characteristics of the selected PV module during the change of the solar irradiation are shown in Fig.…”

Section: A Pv Station Configuration 1) Selection Of the Pv Modulementioning

confidence: 99%

Modeling, Control, and Performance Evaluation of Grid-Tied Hybrid PV/Wind Power Generation System: Case Study of Gabel El-Zeit Region, Egypt

et al. 2020

View full text Add to dashboard Cite

The potential for utilizing clean energy technologies in Egypt is excellent given the abundant solar irradiation and wind resources. This paper provides detailed design, control strategy, and performance evaluation of a grid-connected large-scale PV/wind hybrid power system in Gabel El-Zeit region located along the coast of the Red Sea, Egypt. The proposed hybrid power system consists of 50 MW PV station and 200 MW wind farm and interconnected with the electrical grid through the main Point of Common Coupling (PCC) busbar to enhance the system performance. The hybrid power system is controlled to operate at the unity power factor and also the Maximum Power Point Tracking (MPPT) technique is applied to extract the maximum power during the climatic conditions changes. Modeling and simulation of the hybrid power system have been performed using MATLAB/SIMULINK environment. Moreover, the paper presented a comprehensive case study about the realistic monthly variations of solar irradiance and wind speed in the study region to validate the effectiveness of the proposed MPPT techniques and the used control strategy. The simulation results illustrate that the total annual electricity generation from the hybrid power system is 1509.85 GWh/year, where 118.15 GWh/year (7.83 %) generates from the PV station and 1391.7 GWh/year (92.17%) comes from the wind farm. Furthermore, the hybrid power system successfully operates at the unity power factor since the injected reactive power is kept at zero.

show abstract

A simplified mathematical model for power output predicting of Building Integrated Photovoltaic under partial shading conditions

Cited by 59 publications

References 35 publications

Optimal Shunt-Resonance Fault Current Limiter for Transient Stability Enhancement of a Grid-Connected Hybrid PV/Wind Power System

Optimal Shunt-Resonance Fault Current Limiter for Transient Stability Enhancement of a Grid-Connected Hybrid PV/Wind Power System

Modified STATCOM control strategy for fault ride-through capability enhancement of grid-connected PV/wind hybrid power system during voltage sag

Modeling, Control, and Performance Evaluation of Grid-Tied Hybrid PV/Wind Power Generation System: Case Study of Gabel El-Zeit Region, Egypt

Contact Info

Product

Resources

About