A robust state estimation by optimal placement of measurement units considering loads/renewable generations and measurements uncertainty

Abstract

The supervisory control and data acquisition (SCADA) system is one of the key requirements for monitoring the power systems state. The power system state is estimated from the state estimation (SE) function, which uses the measurements results from different points. Inaccurate estimation may cause inefficient management of power systems and making decisions. Usually, the number of measurement units (MUs) is limited so the optimal location of MUs is very important in successful and accurate state estimation. The optimal placement of MUs gets more complicated when the actual state of the power system is uncertain due to the high penetration of renewable generation and load uncertainties. Considering the power system's actual state uncertainty and measurement units’ inherent error, this work presents a probabilistic model for the uncertainty of measuring based on the K‐medoids data clustering technique. Then the probabilistic optimal placement of MUs is solved by a binary particle swarm optimization (PSO) method. Considering the mentioned uncertainties makes the obtained solution robust against all the probable scenarios. The proposed technique is implemented on the IEEE 14‐bus test system and the results are discussed. Results show the effectiveness of the proposed method in improving the accuracy of power system state estimation.