A Review of PZT Patches Applications in Submerged Systems

Presas, Alexandre; Luo, Yongyao; Wang, Zhengwei; Valentín, David; Egusquiza, Mònica

doi:10.3390/s18072251

Cited by 35 publications

(15 citation statements)

References 115 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…They can be conveniently arranged as a network of sensors to record multipoint measurements under and on the surface of the host structure. One prominent feature of PZT transducers for damage detection is that their performance does not deteriorate even when the damage occurs in its vicinity [6,9]. Lamb-wave-based damage detection techniques have employed different arrangements of PZT transducers to actuate and sense the wave propagation.…”

Section: Introductionmentioning

confidence: 99%

Lamb-Wave-Based Multistage Damage Detection Method Using an Active PZT Sensor Network for Large Structures

Hameed

Chen

et al. 2019

Sensors

View full text Add to dashboard Cite

A multistage damage detection method is introduced in this work that uses piezoelectric lead zirconate titanate (PZT) transducers to excite/sense the Lamb wave signals. A continuous wavelet transformation (CWT), based on the Gabor wavelet, is applied to accurately process the complicated wave signals caused by the damage. For a network of transducers, the damage can be detected in one detection cell based on the signals scattered by the damage, and then it can be quantitatively estimated by three detection stages using the outer tangent circle and least-squares methods. First, a single-stage damage detection method is carried out by exciting a transducer at the center of the detection cell to locate the damaged subcell. Then, the corner transducers are excited in the second and third stages of detection to improve the damage detection, especially the size estimation. The method does not require any baseline signal, and it only utilizes the same arrangement of transducers and the same data processing technique in all stages. The results from previous detection stages contribute to the improvement of damage detection in the subsequent stages. Both numerical simulation and experimental evaluation were used to verify that the method can accurately quantify the damage location and size. It was also found that the size of the detection cell plays a vital role in the accuracy of the results in this Lamb-wave-based multistage damage detection method.

show abstract

Section: Introductionmentioning

confidence: 99%

Lamb-Wave-Based Multistage Damage Detection Method Using an Active PZT Sensor Network for Large Structures

Hameed

Chen

et al. 2019

Sensors

View full text Add to dashboard Cite

show abstract

“…Different vibration control strategies are used to study vortex-induced vibrations of a bridge deck [4][5][6], building structure [7][8][9][10][11][12], and other structures [13][14][15]. It is worth mentioning that scholars have carried out much research on piezoelectric-based vibration control [16][17][18][19][20][21][22][23][24][25][26].…”

Section: Introductionmentioning

confidence: 99%

Time-Delayed Feedback Control of Piezoelectric Elastic Beams under Superharmonic and Subharmonic Excitations

Jian

Xiang

et al. 2019

Applied Sciences

View full text Add to dashboard Cite

The time-delayed displacement feedback control is provided to restrain the superharmonic and subharmonic response of the elastic support beams. The nonlinear equations of the controlled elastic beam are obtained with the help of the Euler–Bernoulli beam principle and time-delayed feedback control strategy. Based on Galerkin method, the discrete nonlinear time-delayed equations are derived. Using the multiscale method, the first-order approximate solutions and stability conditions of three superharmonic and 1/3 subharmonic resonance response on controlled beams are derived. The influence of time-delayed parameters and control gain are obtained. The results show that the time-delayed displacement feedback control can effectively suppress the superharmonic and subharmonic resonance response. Selecting reasonably the time-delayed quantity and control gain can avoid the resonance region and unstable multi-solutions and improve the efficiency of the vibration control. Furthermore, with the purpose of suppressing the amplitude peak and governing the resonance stability, appropriate feedback gain and time delay are derived.

show abstract

“…Lead Zirconate -Lead Titanate (PZT) solid solution is the most renowned ferroelectric material being employed for diverse purposes such as high energy-storage devices, ultrasonic detectors, hydrophones, transducers, infra-red detectors, electro optic devices, and nonvolatile memories (FERAM) [6][7][8][9][10][11][12][13][14]. The ferroelectric PZT crystallizes in ABO 3 perovskite structure, Fig.…”

Section: Introductionmentioning

confidence: 99%

Multifunctional behavior of acceptor-cation substitution at higher doping concentration in PZT ceramics

Kumari

Monga

Arif

et al. 2019

Ceramics International

View full text Add to dashboard Cite

The Fe-doped PZT, Pb (Zr, Ti) 1-x Fe x O 3 , ceramics have gathered plenty of attention because of the interplay of ferroelectric and ferromagnetic properties. In the present study, we report the properties of Pb(Zr 0.52 Ti 0.48) 1-x Fe x O 3 , x = 0, 0.05, 0.10, 0.15 and 0.20, prepared by conventional solid state reaction route with varying Fe 3+ doping concentrations. Study of X-ray diffraction patterns confirmed the tetragonal crystal structure with reduction in tetragonality and unit cell size with doping. It also showed formation of secondary magneto-plumbite phase at higher doping concentrations. The SEM micrographs exhibited decrease in grain size with increase in doping concentration (for x > 0.05). The increase in oxygen vacancies and the formation of secondary magneto-plumbite phase and Fe 3+-VO 2−-Fe 3+ defect dipole complexes introduced with the acceptor (Fe 3+) doping, caused clamping of the domain walls and hence reduced the room temperature dielectric constant as the doping concentration was increased. The coexistence of electrical polarization and magnetic moment at room temperature in all PFZT compositions confirmed the multiferroic characteristic in the ceramic samples. Electric polarization (P r) and coercive fields (E c) decreased with increase in Fe 3+ concentration in PFZT sample. However, magnetization (M) and magnetic coercive fields (E c) increased with the increasing Fe 3+ concentration due to the dominant effect of F-center exchange mechanism in Fe 3+-VO 2−-Fe 3+ and formation of ferromagnetic secondary magneto-plumbite phase.

show abstract

A Review of PZT Patches Applications in Submerged Systems

Cited by 35 publications

References 115 publications

Lamb-Wave-Based Multistage Damage Detection Method Using an Active PZT Sensor Network for Large Structures

Lamb-Wave-Based Multistage Damage Detection Method Using an Active PZT Sensor Network for Large Structures

Time-Delayed Feedback Control of Piezoelectric Elastic Beams under Superharmonic and Subharmonic Excitations

Multifunctional behavior of acceptor-cation substitution at higher doping concentration in PZT ceramics

Contact Info

Product

Resources

About