A Review of Pore Structure Characterization of Unconventional Tight Reservoirs

Abstract

The global growing energy demand driving the industry attention towards unconventional oil/gas resources due to limited conventional resources. Huge reserves of unconventional makes them promising and draw the industry attention, however oil/gas is stored in micro to nano scale pores with poor connectivity. It is very essential however difficult to quantify the flow characteristics in porous media in unconventional reservoirs due to complex pore network, irregular geometry of pore throat and non-homogeneous pore size distribution. Various experimental techniques to determine quantitative and qualitative characteristics of pore systems have been studied including scanning electron microscopy (SEM), nuclear magnetic resonance (NMR), micro/nano computed tomography (XCT), and fluid invasion (mercury injection capillary pressure and gas adsorption/desorption). The comparison analysis of results has been carried out that exhibited the ability of these techniques to get the information about the pore size distribution and limitations for different pore sizes. Best and reliable technique for characterizing the pore structures in unconventional has been identified. SEM and FE-SEM are only able to provide the qualitative parameters for pore morphology, distribution and connectivity of pores. Three-dimensional image of pore structure and network could be studied through micro-CT scan images however, its high expense and huge processing time due to observation of small region at certain resolution make its use limited. Nitrogen adsorption is only able to study the micropores in tight sandstones but it destructive nature limits its usage. Pressure controlled mercury porosimeter technique is not able to determine the microporosity directly and determine the throat. It does not provide pore throat distribution. Application of high pressure may damage the pore structure. However, this mercury injection constant pressure rate can be applied for yielding both pore sizes and capillary pressure of pore throats. Both small throat and large pore body can be investigated through this technique, but this technique has limitation in maximum injection pressure. NMR is able to provide the qualitative and quantitative delineation of pore structures features such as pore throat distribution, sizes, and pore fluid saturation, total and effective porosity, and permeability directly if supplemented with other techniques. Detailed analyses of different analytical techniques resulted that none of the technique is able to fully characterize the pore structure of unconventional tight rocks. Combination of more than one technique is the best solution for complete description and accurate determination of pore structure characteristics.

Characteristics of Tight Gas Reservoirs in the Xujiahe Formation in the Western Sichuan Depression: A Systematic Review

“…As exploration and development processes for tight gas sandstone reservoirs have advanced, more sophisticated requirements for characterizing and describing the microstructures of tight gas reservoirs in the Xujiahe Formation in the Western Sichuan Depression have emerged. Consequently, future research needs to place greater emphasis on the influence of sedimentation and tectonic processes on reservoir pore structures [60,61].…”

Investigating Recovery Potential through Depletion Development of Tight Oil Reservoirs via NMR Technology

“…Tight oil reservoirs are characterized by their low permeability and complex pore network, which severely hampers the flow of hydrocarbons and impedes conventional production methods. − A combination of horizontal drilling and hydraulic fracturing is used to create multiple fractures and increase production. − Despite the benefits of hydraulic fracturing, there are challenges to maintaining production levels, such as rapid declines, instability, and low primary recovery rates of 5–10%, with a significant portion of the oil remaining trapped in the reservoir matrix. − …”

Pore-Throat Size Distribution and Classification of the Paleogene Tight Sandstone in Lishui Sag, East China Sea Shelf Basin, China

“…With substantial expansion of unconventional tight sandstone reservoir oil and gas exploration theory, the progress of reservoir fine characterization technology, and increases in global demand for oil and gas resources, unconventional tight sandstone reservoirs with huge resource potential and development space have attracted global attention. − In addition, the detailed characterization of tight sandstone reservoirs has attracted great attention. − Tight sandstone reservoirs develop nanometer–micron-scale pores and throats. A pore-throat is generally between 0.01 and 1 μm in diameter and is the main reservoir space of tight sandstone reservoirs. − Because of the wide distribution and complex structure of pores and throats, they have been hot topics of research into the characteristics of tight sandstone reservoirs. , …”