A Review of Modifying Agents Use to Improve Nuclear Fuel Performance in the Reactore Core

Abstract

Today there are numerous research works meant to improve nuclear fuel element performance in order to ensure reliable operation under increased burn-up conditions. In this context the pellet microstructure seems to be a very important parameter. An increase in the grain size diminishes the branching of boundaries and reduces the migration speed of gas-filled pores to the grain boundaries which are the routes of accelerated diffusion. The problem can be solved by introducing nano additives to uranium dioxide considering the influence of small addition agents upon the grain growth activation and microstructure evolution. The addition of nano particles of different powders should stimulate agglomeration process. This is one of modern tendencies in the development of new material technologies for fast reactors. In the research process the mechanical activation with simultaneous size reduction of gadolinium oxide and aluminum and gadolinium hydroxide powders (Gd2O3 №1, Gd2O3 №2, Al(OH)3 and Gd(OH)3) was done in planetary centrifugal mill "Pulverisette 5" made by Fritsch GmbH company (Germany). The technology of UO2 nuclear fuel manufacture has been developed in several variants including the agglomeration with pre-pressing or extruding, isostatic and hot pressing, rotary swaging, vibratory compacting, slip casting, etc. Today the main UO2 fuel element manufacturing technologies are cold pressing and agglomeration considering their simplicity and affordability. The conducted research permitted to ascertain some specific features of initial TiO2, Al(OH)3, Gd2O3, and Gd(OH)3 additives and determine their basic properties. The authors determined the most optimal modes of fine-grained additives production and proposed and optimal method of their introduction into UO2 mixtures. The paper also considers possible mechanisms of fine-grained additives influence on the fuel pellet production.