A reconfigurable arbitrary waveform generator using PWM modulation for ultrasound research

Abstract

BackgroundIn ultrasound imaging systems, the digital transmit beamformer is a critical module that generates accurate control over several transmission parameters. However, such transmit front-end module is not typically accessible to ultrasound researchers. To overcome this difficulty, we have been developing a compact and fully programmable digital transmit system using the pulse-width modulation (PWM) technique for generating simultaneous arbitrary waveforms, specifically designed for research purposes.MethodsIn this paper we present a reconfigurable arbitrary waveform generator (RAWG) for ultrasound research applications that exploits a high frequency PWM scheme implemented in a low-cost FPGA, taking advantage of its flexibility and parallel processing capability for independent controlling of multiple transmission parameters. The 8-channel platform consists of a FPGA-based development board including an USB 2.0 interface and an arbitrary waveform generator board with eight MD2130 beamformer source drivers for individual control of waveform, amplitude apodization, phase angle and time delay trigger.ResultsTo evaluate the efficiency of our system, we used equivalent RC loads (1 kΩ and 220 pF) to produce arbitrary excitation waveforms with the Gaussian and Tukey profiles. The PWM carrier frequency was set at 160 MHz featuring high resolution while keeping a minimum time delay of 3.125 ns between pulses to enable the acoustic beam to be focused and/or steered electronically. Preliminary experimental results show that the RAWG can produce complex arbitrary pulses with amplitude over 100 Vpp and central frequency up to 20 MHz with satisfactory linearity of the amplitude apodization, as well as focusing phase adjustment capability with angular resolution of 7.5°.ConclusionsThe initial results of this study showed that the proposed research system is suitable for generating simultaneous arbitrary waveforms, providing extensive user control with direct digital access to the various transmission parameters needed to explore alternative ultrasound transmission techniques.

Development of temperature controller-integrated portable HIFU driver for thermal coagulation

“…The function generator utilized a CMOS synthesizer (AD9851, Analog Device, Norwood, MA) to produce pulse-width modulated (PWM) signals with duty cycles ranging from 20 to 80% at 2 MHz frequency. The high-voltage ultrasonic signal transmission, with a PWM voltage amplitude up to 50 V, was achieved using four high-speed dual MOSFET drivers (MD1213, Microchip Technology, Chandler, AZ) and N- and P-channel MOSFETs (TC6320, Microchip Technology, Chandler, AZ) [23–25]. A maximum amplitude of 50 V was selected in the present study to achieve the target temperature (around 60 °C) with minimum driver size.…”

A flexible multichannel FPGA and PC-Based ultrasound system for medical imaging research: initial phantom experiments

“…Initially, the functionality of the MD2131 transmitter was tested by generating an arbitrary pulse with the Gaussian profile and 35% relative bandwidth, using the method presented by Assef et al (2013). In order to demonstrate the feasibility of the US research system, two applications are illustrated below.…”

Ultrasound Open Platforms for Next-Generation Imaging Technique Development

“…Yet, their power efficiency is higher than that for linear power amplifiers. As well, space integration is a plus, since the market offers ICs that integrate 16 channels, five-level pulsers in 1 cm 2 to support arbitrary waveform generation [65] .…”