A Promising Mortar Produced with Seawater and Sea Sand

Abstract

The aim of the study is the deep understanding of the essential reactivity of the environmentally friendly mortar by which its applicability can be justified. Created in the study was the environmentally friendly mortar, which helped relieve the increasing requirements on conventional building materials that are produced from exhausted freshwater and river sand nowadays. Seawater (SW) and sea sand (SS) collected from the Eastern Seas of China were used to produce the mortar at various ages, including 10-day, 33-day, and 91-day. Both the curing and working conditions of the mortar were natural marine ones. The physicochemical-mechanical behaviors were investigated using uniaxial compression tests (UCTs), Energy Dispersive Spectrometer (EDS), X-ray Diffraction (XRD), and thermal-field emission scanning electron microscopy (SEM) analysis to understand the essential reactivity of the mortar with age accumulation. The results indicated that hydration products and favorable components were generated promisingly in the mortar: the C-S-H (xCaO·SiO2·zH2O) development was certainly achieved in the critical environment during the curing and working period; the extensive generation of C-A-S-H (CaO·Al2O3·2SiO2·4H2O) helped densify the C-S-H grid, which caused the promising development of the uniaxial compression strength (UCS); the framework porosity of the mortar was restrained effectively due to the development of Friedel’s salt that re-bonded the interfacial cracks between SS and the hydration products with the age accumulation in the critical environment. Consequently, UCS and the resistance against damage of the mortar showed increasing behavior even in the critical environment. The study established Friedel’s salt working models and strength and damage models to interpret the physicochemical reactivity of the mortar as: the source of the strength and toughness was the proper polymerization between the native saline components and the hydration product mixture generated throughout the production, curing, and application without the leaching phenomenon. The novel models and interpretation of the physicochemical reactivity ensured the applicability of the mortar produced with SW and SS in the critical environment.

A novel process on recyclable particle materials used for aggregate columns

“…However, the exhausting consumption of fossil minerals hindered the general application of sand or gravel compaction piles. The recyclable think was borrowed from the materials sciences and the mechanical performance in engineering cases showed the precise advantages [1][2][3]. The diverse sources of the particle materials spread the application of the aggregate columns in the soil foundation cases [4].…”