A potent approach for the development of FPGA based DAQ system for HEP experiments

Abstract

With ever increasing particle beam energies and interaction rates in modern High Energy Physics (HEP) experiments in the present and future accelerator facilities, there has always been the demand for robust Data Acquisition (DAQ) schemes which perform in the harsh radiation environment and handle high data volume. The scheme is required to be flexible enough to adapt to the demands of future detector and electronics upgrades, and at the same time keeping the cost factor in mind. To address these challenges, in the present work, we discuss an efficient DAQ scheme for error resilient, high speed data communication on commercially available state-of-the-art FPGA with optical links. The scheme utilises GigaBit Transceiver (GBT) protocol to establish radiation tolerant communication link between on-detector front-end electronics situated in harsh radiation environment to the back-end Data Processing Unit (DPU) placed in a low radiation zone. The acquired data are reconstructed in DPU which reduces the data volume significantly, and then transmitted to the computing farms through high speed optical links using 10 Gigabit Ethernet (10GbE). In this study, we focus on implementation and testing of GBT protocol and 10GbE links on an Intel FPGA. Results of the measurements of resource utilisation, critical path delays, signal integrity, eye diagram and Bit Error Rate (BER) are presented, which are the indicators for efficient system performance.

Design and development of a low cost Arduino controlled ethernet interfaced Majority Logic Unit

“…There are other high performance options, like field programmable gate arrays (FPGAs) for the development of the control section [17,18]. However we have chosen Arduino board as it is the optimal and judicious choice for our requirements, which is low cost and less complex.…”

Optimization of multi-gigabit transceivers for high speed data communication links in HEP Experiments

“…The experiments are continuously upgraded with sophisticated detectors, electronics and DAQ systems [2,3]. The DAQ architectures have been evolving continuously to cope up with the demands of the experiments [4,5]. The LHC at CERN will go through a major upgrade during the long shutdown (LS2) period, following which the beam luminosities will increase by about an order of magnitude from their present values.…”