A Pairwise SSD Fingerprinting Method of Smartphone Indoor Localization for Enhanced Usability

Abstract

Smartphone indoor localization has attracted considerable attention over the past decade because of the considerable business potential in terms of indoor navigation and location-based services. In particular, Wi-Fi RSS (received signal strength) fingerprinting for indoor localization has received significant attention in the industry, for its advantage of freely using off-the-shelf APs (access points). However, RSS measured by heterogeneous mobile devices is generally biased due to the variety of embedded hardware, leading to a systematical mismatch between online measures and the pre-established radio maps. Additionally, the fingerprinting method based on a single RSS measurement usually suffers from signal fluctuations due to environmental changes or human body blockage, leading to possible large localization errors. In this context, this study proposes a space-constrained pairwise signal strength differences (PSSD) strategy to improve Wi-Fi fingerprinting reliability, and mitigate the effect of hardware bias of different smartphone devices on positioning accuracy without requiring a calibration process. With the efforts of these two aspects, the proposed solution enhances the usability of Wi-Fi fingerprint positioning. The PSSD approach consists of two critical operations in constructing particular fingerprints. First, we construct the signal strength difference (SSD) radio map of the area of interest, which uses the RSS differences between APs to minimize the device-dependent effect. Then, the pairwise RSS fingerprints are constructed by leveraging the time-series RSS measurements and potential spatial topology of pedestrian locations of these measurement epochs, and consequently reducing possible large positioning errors. To verify the proposed PSSD method, we carry out extensive experiments with various Android smartphones in a campus building. In the case of heterogeneous devices, the experimental results demonstrate that PSSD fingerprinting achieves a mean error ∼20% less than conventional RSS fingerprinting. In addition, PSSD fingerprinting achieves a 90-percentile accuracy of no greater than 5.5 m across the tested heterogeneous smartphones

Hybrid Urban Canyon Pedestrian Navigation Scheme Combined PDR, GNSS and Beacon Based on Smartphone

“…Formulas (1)-(4) describe the manner in which the internal MEMS sensor measurements of a smart phone can be processed to obtain the heading. The heading has big bias compare with the true pedestrian direction due to sensor error, environment interference and orientation bias of pedestrians and smart phones [27,28]. Thus, we use gyroscope, accelerometer and magnetometer measurements to obtain a fusion solution via Kalman filter to improve the heading precision in our strategy.…”

Fusion of Channel State Information and Received Signal Strength for Indoor Localization Using a Single Access Point

“…Many of these work using a time-based geometric location such as time of arrival (ToA) [9] , round trip time (RTT) [10] or time difference of arrival (TDoA) [11] , even angle of arrival (AoA) [12]. Nevertheless, fingerprinting-based indoor localization systems are in the spotlight, being their benefits the simplicity, low hardware requirements and non requiring additional sensors to infer user location [13,14].…”

A Robust Indoor Positioning Method based on Bluetooth Low Energy with Separate Channel Information

“…The reason why they did not take advantage of the sub-band information is that the WiFi Access Point (AP) used to collect information such as RSSI, but RSSI was originally designed for communication so that the sub-band information remains private for users. The use of RSSI in previous works [4,13,15,16,17] has suffered from many problems, such as body blockage, the temporal environmental change effect, etc. Unlike the RSSI, the recent studies leveraging channel state information (CSI) from all sub-bands have revealed that CSI has more fine-grained information than RSSI; hence, CSI is more robust against body blockage and the temporal environmental change effect, and therefore, a better positioning performance can be expected [16,18,19].…”