A Novel Repair Technique of Pre-damaged T-Beams Failing in Shear Using Eco-Friendly Steel Fibre-Reinforced Geopolymer Concrete

Abstract

Repair of reinforced concrete structures is required to preserve the adequate performance of these structures throughout their service life. One of the credible techniques is using fibrous concrete as a repair material. In this paper, the performance of steel fibre-reinforced geopolymer concrete (SFRGPC) in the repair of pre-damaged reinforced concrete T-beams (pre-loaded up to 50% of their shear capacity) failing in shear was investigated. Five T-beam series and a four-point loading test were adopted: one reference beam, three beams were repaired with different fibrous ratios of 1, 2, and 3%, and one was repaired with 2% steel fibre and additional U-steel stirrups. The key test results include crack propagation, crack width, initial stiffness, load deflection, peak loads, and strain associated with web stirrups. A clear enhancement was noticed in the performance of the repaired T-beams; their shear capacity was boosted by as much as 45% compared to the control beam. It was also deduced that the beam went from a brittle to a ductile failure mode at 3% SFRGPC and at 2% SFRGPC with U-stirrups. Finally, an analytical model prediction was proposed to predict the shear capacity of repaired T-beams with the SFRGPC. The model showed a satisfactory correlation with experimental results, with an average ratio of 0.995 and a standard deviation of 0.035.