A novel piezoelectric actuated 2-DOF joint for underwater manipulator: design, simulation, and experimental investigation

Abstract

For some underwater applications that need lightweight manipulator and fine operation, a novel piezoelectric actuated underwater mechanical manipulator two-degrees-of-freedom (2-DoF) joint was proposed and investigated in this study. The joint is composed of two unit arm sections orthogonally connected by connecting components. The inverse piezoelectric effect of the piezoelectric actuator on the unit arm section generates friction as a driving force in the contact area of the two unit arm sections, which can realize the 2-DoF rotation of the unit arm section. Due to the compatibility of the piezoelectric actuated method with the water environment, the manipulator joint adopts a simpler and more compact open structure, which does not require additional complicated waterproof sealing devices, and has the advantages of smaller size and lightweight. In addition, because the piezoelectric actuated method directly drives the unit arm section through the friction contact interface, it can achieve micro-displacement, so that the joint has the advantage of fine work. First of all, a 2-DoF joint prototype was designed, and corresponding simulations were performed to verify its working principle. Then a prototype of the proposed manipulator joint was made, its size is 125 mm × 25 mm × 25 mm and weighs 35.6 g, and experimental investigation was carried out. Finally, the experimental results show that the joint prototype can achieve motion in the air and underwater. The water environment will have a certain influence on the optimal working frequency and output performance of the joint. The proposed joint has potential application prospects in some microminiaturization and fine manipulation occasions.

A Biomimetic Piezoelectric Composite‐Driven Undulation Underwater Robotic Structure: Characteristic Analysis and Experimental Investigation

“…Certain researchers, such as Zhang et al and Liu et al, have utilized commercial FEA software to investigate the steady-state vibration characteristics of piezoelectric actuators, including modal resonant frequency and amplitude responses. [41,42] However, these studies lack a comprehensive examination of the vibration characteristics of undulation robots in the time domain. Recently, Gohari et al applied piezoelectric linear theory and classical plate theory to develop an analytical solution for the bending response of smart piezoelectric laminates with flexible spring boundary structures.…”

Enhancement of torque density and power density of polymer-based ultrasonic motors via flexible usage of anisotropy in elastic property

“…To date, three methods have been dominantly adopted to enhance torque densities and/or power densities of USMs, i.e. optimization in structure [16], improvement in frictional conditions [17], and usage of new materials [18]. As the examples of structural optimization [8,[19][20][21][22], Chen et al [21] attempted to improve the performance by tuning the Ishaped portion's thickness between the teeth's surface and the bonding layer.…”

Design, simulation, and experimental investigation on a novel robot fish driven by piezoelectric bimorphs

“…The PZT actuator uses the inverse PZT effect of PZT ceramics and has a compact structure and fast response [17][18][19][20], presenting the potential application in the drive of bionic robots. Kosa et al proposed a traveling wave-propelled tail section, which consists of three PZT laminar beams that are controlled to produce waveform motion by applying electrical signals of the same frequency, different phases, and amplitude to the three PZT beams [21].…”