A novel on design and implementation of hybrid MPPT controllers for solar PV systems under various partial shading conditions
Chakarajamula Hussaian Basha,
Madhu Palati,
C. Dhanamjayulu
et al.
Abstract:At present, fossil fuel-based power generation systems are reducing drastically because of their less availability in nature. In addition, it produces hazardous gasses and high environmental pollution. So, in this work, the solar natural source is selected for generating the electricity. Due to the nonlinear behavior of PV, achieving maximum voltage from the Photovoltaic (PV) system is a more tough job. In this work, various hybrid optimization controllers are studied for tracing the working power point of the… Show more
“…These approaches are chosen according to their requirements, such as simple implementation, accuracy, cost effectiveness, and time calculation 16 . Perturb and Observe 17 and incremental conductance 18 , are the two most frequently employed methods because they are easy and simple to use. Nevertheless, they have difficulties in that they are unable to follow the MPP during the fast of sunlight fluctuations.…”
This paper proposes an innovative approach to improve the performance of grid-connected photovoltaic (PV) systems operating in environments with variable atmospheric conditions. The dynamic nature of atmospheric parameters poses challenges for traditional control methods, leading to reduced PV system efficiency and reliability. To address this issue, we introduce a novel integration of fuzzy logic and sliding mode control methodologies. Fuzzy logic enables the PV system to effectively handle imprecise and uncertain atmospheric data, allowing for decision-making based on qualitative inputs and expert knowledge. Sliding mode control, known for its robustness against disturbances and uncertainties, ensures stability and responsiveness under varying atmospheric conditions. Through the integration of these methodologies, our proposed approach offers a comprehensive solution to the complexities posed by real-world atmospheric dynamics. We anticipate applications in grid-connected PV systems across various geographical locations and climates. By harnessing the synergistic benefits of fuzzy logic and sliding mode control, this approach promises to significantly enhance the performance and reliability of grid-connected PV systems in the presence of variable atmospheric conditions. On the grid side, both PSO (Particle Swarm Optimization) and GA (Genetic Algorithm) algorithms were employed to tune the current controller of the PI (Proportional-Integral) current controller (inverter control). Simulation results, conducted using MATLAB Simulink, demonstrate the effectiveness of the proposed hybrid MPPT technique in optimizing the performance of the PV system. The technique exhibits superior tracking efficiency, achieving a convergence time of 0.06 s and an efficiency of 99.86%, and less oscillation than the classical methods. The comparison with other MPPT techniques highlights the advantages of the proposed approach, including higher tracking efficiency and faster response times. The simulation outcomes are analyzed and demonstrate the effectiveness of the proposed control strategies on both sides (the PV array and the grid side). Both PSO and GA offer effective methods for tuning the parameters of a PI current controller. According to considered IEEE standards for low-voltage networks, the total current harmonic distortion values (THD) obtained are considerably high (8.33% and 10.63%, using the PSO and GA algorithms, respectively). Comparative analyses with traditional MPPT methods demonstrate the superior performance of the hybrid approach in terms of tracking efficiency, stability, and rapid response to dynamic changes.
“…These approaches are chosen according to their requirements, such as simple implementation, accuracy, cost effectiveness, and time calculation 16 . Perturb and Observe 17 and incremental conductance 18 , are the two most frequently employed methods because they are easy and simple to use. Nevertheless, they have difficulties in that they are unable to follow the MPP during the fast of sunlight fluctuations.…”
This paper proposes an innovative approach to improve the performance of grid-connected photovoltaic (PV) systems operating in environments with variable atmospheric conditions. The dynamic nature of atmospheric parameters poses challenges for traditional control methods, leading to reduced PV system efficiency and reliability. To address this issue, we introduce a novel integration of fuzzy logic and sliding mode control methodologies. Fuzzy logic enables the PV system to effectively handle imprecise and uncertain atmospheric data, allowing for decision-making based on qualitative inputs and expert knowledge. Sliding mode control, known for its robustness against disturbances and uncertainties, ensures stability and responsiveness under varying atmospheric conditions. Through the integration of these methodologies, our proposed approach offers a comprehensive solution to the complexities posed by real-world atmospheric dynamics. We anticipate applications in grid-connected PV systems across various geographical locations and climates. By harnessing the synergistic benefits of fuzzy logic and sliding mode control, this approach promises to significantly enhance the performance and reliability of grid-connected PV systems in the presence of variable atmospheric conditions. On the grid side, both PSO (Particle Swarm Optimization) and GA (Genetic Algorithm) algorithms were employed to tune the current controller of the PI (Proportional-Integral) current controller (inverter control). Simulation results, conducted using MATLAB Simulink, demonstrate the effectiveness of the proposed hybrid MPPT technique in optimizing the performance of the PV system. The technique exhibits superior tracking efficiency, achieving a convergence time of 0.06 s and an efficiency of 99.86%, and less oscillation than the classical methods. The comparison with other MPPT techniques highlights the advantages of the proposed approach, including higher tracking efficiency and faster response times. The simulation outcomes are analyzed and demonstrate the effectiveness of the proposed control strategies on both sides (the PV array and the grid side). Both PSO and GA offer effective methods for tuning the parameters of a PI current controller. According to considered IEEE standards for low-voltage networks, the total current harmonic distortion values (THD) obtained are considerably high (8.33% and 10.63%, using the PSO and GA algorithms, respectively). Comparative analyses with traditional MPPT methods demonstrate the superior performance of the hybrid approach in terms of tracking efficiency, stability, and rapid response to dynamic changes.
“…The algorithm decides whether to increase or reduce the operating point based on this observation (Fig. 7 ) 8 , 12 , 15 . Figure 7 P&O algorithm principle.…”
Section: Optimization Of Photovoltaic and Wind Generatorsmentioning
confidence: 99%
“…Fuzzy logic controllers are very used in MPP research 9 – 12 . The MPPT method from FLC is an intelligent control approach used in PV and wind turbine systems to efficiently track and maintain the MPP of a solar array 75 .…”
Section: Optimization Of Photovoltaic and Wind Generatorsmentioning
confidence: 99%
“…The P&O approach is widely utilized because of its ease of use. However, it has the disadvantage of oscillations, which cannot be totally removed 12 , 15 . For advanced methods, the FLC, artificial neural networks (ANN) and sliding mode control (SMC) are the most used 26 – 28 .…”
This research discusses the solar and wind sourcesintegration in aremote location using hybrid power optimization approaches and a multi energy storage system with batteries and supercapacitors. The controllers in PV and wind turbine systems are used to efficiently operate maximum power point tracking (MPPT) algorithms, optimizing the overall system performance while minimizing stress on energy storage components. More specifically, on PV generator, the provided method integrating the Perturb & Observe (P&O) and Fuzzy Logic Control (FLC) methods. Meanwhile, for the wind turbine, the proposed approach combines the P&O and FLC methods. These hybrid MPPT strategies for photovoltaic (PV) and wind turbine aim to optimize its operation, taking advantage of the complementary features of the two methods. While the primary aim of these hybrid MPPT strategies is to optimize both PV and wind turbine, therefore minimizing stress on the storage system, they also aim to efficiently supply electricity to the load. For storage, in this isolated renewable energy system, batteries play a crucial role due to several specific benefits and reasons. Unfortunately, their energy density is still relatively lower compared to some other forms of energy storage. Moreover, they have a limited number of charge–discharge cycles before their capacity degrades significantly. Supercapacitors (SCs) provide significant advantages in certain applications, particularly those that need significant power density, quick charging and discharging, and long cycle life. However, their limitations, such as lower energy density and specific voltage requirements, make them most effective when combined with other storage technologies, as batteries. Furthermore, their advantages are enhanced, result a more dependable and cost-effective hybrid energy storage system (HESS). The paper introduces a novel algorithm for power management designed for an efficient control. Moreover, it focuses on managing storage systems to keep their state of charge (SOC) within defined range. The algorithm is simple and effective. Furthermore, it ensures the longevity of batteries and SCs while maximizing their performance. The results reveal that the suggested method successfully keeps the limits batteries and SCs state of charge (SOC). To show the significance of system design choices and the impact on the battery’s SOC, which is crucial for the longevity and overall performance of the energy storage components, a comparison in of two systems have been made. A classical system with one storage (PV/wind turbine/batteries) and the proposed system with HESS (PV/wind turbine system with batteries). The results show that the suggested scenario investigated with both wind and solar resources appears to be the optimum solution for areas where the two resources are both significant and complementary. The balance between the two resources seems to contribute to less stress on storage components, potentially leading to a longer lifespan. An economical study has been made, using the Homer Pro software, to show the feasibility of the proposed system in the studied area.
“…Lower voltage output ripple, minimal switching loss, and quicker transient response are all benefits of cascaded converters [20,21]. Raspberry Pi PICO is a small computer that provides a flexible environment to develop complex problems [22,23]. There's limited research on implementing PICO for real-time data acquisition, control of MPPT algorithms, and communication with smart grids.…”
Solar photovoltaic (PV) systems stand out as a promising solution for generating clean, carbon-free energy. However, traditional solar panel installations often require extensive land resources, which could become scarce as the population grows. To address this challenge, innovative approaches are needed to maximize solar power generation within limited spaces. One promising concept involves the development of biological tree-like structures housing solar panels. These “solar trees” mimic the arrangement of branches and leaves found in natural trees, following patterns akin to phyllotaxy, which correlates with the Fibonacci sequence and golden ratio. By adopting an alternative 1:3 phyllotaxy pattern, three solar panels can be efficiently arranged along the stem of the solar tree structure, each rotated at a 120-degree displacement. Optimizing the performance of solar trees requires effective maximum power point tracking (MPPT), a crucial process for extracting the maximum available power from solar panels to enhance the overall efficiency. In this study, a novel metaheuristic algorithm called horse herd optimization (HHO) is employed for MPPT in solar tree applications. Moreover, to efficiently manage the generated power, a cascaded buck–boost converter is utilized. This converter is capable of adjusting the DC voltage levels to match the system requirements within a single topology. The algorithm is implemented using MATLAB and embedded within a Raspberry Pi Pico controller, which facilitates the generation of pulse-width modulation (PWM) signals to control the cascaded buck–boost converter. Through extensive validation, this study confirms the effectiveness of the proposed HHO algorithm integrated into the Raspberry Pi Pico controller for optimizing solar trees under various shading conditions. In essence, this research highlights the potential of solar tree structures coupled with advanced MPPT algorithms and power management systems to maximize solar energy utilization, offering a sustainable solution for clean energy generation within limited land resources.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
