A novel mode controllable hybrid valve pressure control method for soft robotic gripper

Abstract

Compared with traditional rigid gripper with joint-linkage structure, novel soft robotic gripper gives rise to continuous concern for the advantages of no-damage grasping, convenient manufacture, easy control, and low cost. In this study, we design and built two kinds of soft robotic grippers with four fiber-reinforced soft actuators which are distributed in circular and rectangle shapes for single and twin contacts grasping. A novel hybrid valve pneumatic control scheme combining proportional and solenoid valves is proposed. Also, a mode controllable hybrid valve pressure control method is proposed to adjust internal pressure of soft robotic grippers to adapt to different grasping tasks. The experiment results verify that the performances of hybrid valve outperform those of individual proportional valve or solenoid valve in the aspects of response time and steady-state accuracy. The hybrid valve has wide range of pressure regulation, result in that the soft robotic grippers are qualified to grasp various objects with different shapes, sizes, and weights.

Soft Robotic Grippers for Crop Handling or Harvesting: A Review

“…Two FEA grippers and three suction cup grippers used the five air pressure sensors found in the analyzed literature. The sensors are used to control pressure and see whether successful suction has been achieved [59], [60], [64], [103], [104].…”

Path planning and intelligent control of a soft robot arm based on gas-structure coupling actuators

“…The SRA are challenging to control due to their highly nonlinear hysteresis characteristics, uncertainties and sensitivity to external loading history. The SRA can realize the shape control (Zhang et al, 2016) and the internal pressure control of the pneumatic chambers (Huang et al, 2018). Many research works have been done on position and attitude control using classical control algorithms (Marchese et al, 2016;Hao et al, 2017;Santoso et al, 2017;Alaa et al, 2018).…”

Structural analysis of bending soft pneumatic network actuators for various designs using the finite element method

“…Many researchers find it difficult to model and anticipate their behavior due to the discontinuity of design structures and materials nonlinearity (Huang et al, 2018;Shi et al, 2022;Verma Atul, 2018;Zolfagharian et al, 2020). For example, Venkatesan et al (2021aVenkatesan et al ( , 2021b and Wang et al (2021) used a finite element method to analyze, model and optimize the design of SPA.…”