A Novel Metasurface Lens Design for Synthesizing Plane Waves in Millimeter-Wave Bands

Abstract

With the development of communication technology has come several measurement applications requiring plane-wave conditions for wireless-device characterizations in anechoic chambers. In this paper, a metasurface lens with a 2 × 2 feeding-antenna array is proposed and characterized to synthesize a plane wave in a near field for a fifth-generation (5G) millimeter-wave radio-frequency (RF) devices test. The metasurface lens, based on Jerusalem-cross elements printed on a printed circuit board (PCB) substrate, is used for controlling the phase-shift distribution of incident spherical waves. The lens has a size of 0.4 × 0.4 m and is designed to operate at a range from 24.25 GHz to 27.5 GHz, and its feeding-antenna array is located at a focal plane of the lens, which is parallel to the metasurface lens. The lens is studied and verified through simulations and experiments, and a uniform amplitude and phase-field distribution at a reduced distance of 1.2 m generated by the metasurface lens throughout a QZ are achieved. The worst-case amplitude and phase variation of the designed metasurface lens are ±0.75 dB and ±7.5°, respectively. The results show a plane-wave condition can be achieved in 5G millimeter bands through the proposed compact and effective metasurface lens. Moreover, the proposed metasurface lens is shown to be capable of reducing the plane-wave synthesizing distance compared to the compact antenna test range (CATR) with a significantly reduced system cost, making it an attractive alternative to antenna testing in 5G millimeter-wave frequency bands.

Plane-Wave Generation through General Near-Field In-Band Reflectarray Direct Layout Optimization with Figure of Merit Constraints in mm-Wave Band

“…They consist of array antennas that are optimized to generate a plane wave in their NF region. Although the concept is not new [19,20], it has gained traction in the past few years for over-the-air measurements of 5G devices in the mm-wave ranges [21,22]. The use of conventional arrays generates an issue of requiring complex feeding networks to control the excitation of the array elements [21].…”