A Novel Incremental Bending Process of Complex Curved Sheet Metal

Abstract

The bending of complex curved sheet metals of ship hull has long been a challenge in shipbuilding yard on account of some inherent defects of the traditional forming processes such as the line heating. This paper presents a novel incremental bending process based on punching to obtain complex curved steel plates in order to take the place of those inefficient traditional forming processes of ship hull. The presented incremental bending process is carried out by a series of stepping punches, so it is also defined as incremental punching in this work. By means of this process, the blank plate that is fixed and held by a flexible supporting system can incrementally be bent to the target shape by a press tool with a planned tool trajectory one step after another. Meanwhile, in order to improve geometric accuracy of the formed work-piece, a 3D scanning feedback system is applied to measure the deformation of the work-piece during the forming process. Three dimensional shape of the formed work-piece can be imaged and rebuilt with a large amount of point cloud data by the 3D scanning feedback system. Then the difference between the rebuilt model of the formed work-piece and the target CAD-model can be acquired, which can be used for feedback control of the forming accuracy if necessary. To validate the presented forming process, an original incremental punching prototype was designed and manufactured, which is mainly composed of a 3-axis CNC machine, a flexible supporting system and a 3D scanning feedback system. A forming experiment of a gradual curvature steel plate was carried out using this prototype and is discussed in detail in this paper in order to demonstrate the feasibility of the proposed incremental bending process of complex curved steel plate.

3D reconstruction of non-structural surface of a stiffened hull plate based on RGB-D images

“…But the processing process is complex and the detailed features of data may be ignored in the simplified model. Zuo et al 18 used a 3D scanning system to measure the deformation of steel curved plate induced in bending process. The system can provide a feedback control for the accuracy owing to the difference between the scanning model and the target model.…”