A novel chemical sensor with multiple all-solid-state electrodes and its application in freshwater environmental monitoring

Abstract

Freshwater quality detection is important for pollution control. Three important components of water quality are pH, ammonia and dissolved HS and there is an urgent need for a high-precision sensor for simultaneous and continuous measurement. In this study, all-solid-state electrodes of Eh, pH, NH and S were manufactured and mounted to a wireless chemical sensor with multiple parameters. Calibration indicated that the pH electrode had a Nernst response with slope of 53.174 mV; the NH electrode had a detection limit of 10 mol/L (Nernst response slope of 53.56 mV between 10 to 10 mol/L). Ag/AgS has a detection limit of 10 mol/L (Nernst response slope of 28.439 mV). The sensor was cylindrical and small with low power consumption and low storage demand to achieve continuous in-situ monitoring for long periods. The sensor was tested for 10 days in streams at Trawsgoed Dairy farm in Aberystwyth, UK. At the intensively farmed Trawsgoed, the concentration of NH in the stream rose sharply after the application of slurry to adjacent fields. Further, the stream was overhung with extensive vegetation and exhibited changes in pH, which correlated with photosynthetic activity. Measurements of S were stable throughout the week. Our data demonstrate the applicability of our multiple electrode sensor.

pH electrodes based on iridium oxide films for marine monitoring

“…Zhang et al applied the IROF pH electrodes prepared by an electrogrowth method to determine the pH value of a marine environment, and the results were more stable than those obtained by a traditional glass electrode [73]. Using the characteristics of IROF pH electrodes to fabricate a multi-parameter integrated environmental monitoring sensor is also an important future direction for [74]. A multi-parameter real-time continuous water quality monitoring system has been reported by Defe et al, which can further reduce the cost and maintain highprecision measurements [75].…”

Dual fluorescent hollow silica nanofibers for in situ pH monitoring using an optical fiber

“…Real-time pH measurements are of great importance in chemical reactions, 1 environmental monitoring, 2 and physiological processes. 3,4 Measuring pH values, especially in small volumes, is difficult but necessary for a variety of scientific applications.…”