A Novel Anatomic Titanium Mesh Cage for Reducing the Subsidence Rate After Anterior Cervical Corpectomy: A Finite Element Study

Abstract

Background: Fusion with a titanium mesh cage (TMC) has become popular as a conventional method after cervical anterior corpectomy, but postoperative TMC subsidence has often been reported in the literature. We designed a novel anatomic cervical TMC to reduce the postoperative subsidence rate. This finite element study aims to investigate the anti-subsidence performance of a novel anatomic TMC and provide a theoretical basis for clinical application. Methods: According to the test process specified in the ASTM F2267 standard, three-dimensional finite element analysis was used to compare the anti-subsidence characteristics of a traditional TMC (TTMC) and novel TMC (NTMC). Abaqus software was used for the mesh, and the modulus of elasticity, Poisson's ratio and other material coefficients of each part were input into the model. Solidworks software was used to establish the TTMC and NTMC models and construct the two three-dimensional finite element models of TMC subsidence testing mentioned above. Through analysis, the relationships between the stiffness of the intervertebral body fusion device (Kd) and the stiffness of the polyurethane foam blocks (Ks) of the TTMC and NTMC were derived, respectively. Results: After fitting the linear segment, the Kd values of the TTMC and NTMC were 37314 N/mm and 89124 N/mm, respectively. After calculation, the Ks values of the TTMC and NTMC were 653.83 N/mm and 995.95 N/mm, respectively. The Kp values of the TTMC and NTMC were calculated to be 665.5 N/mm and 1007.2 N/mm according to the formula. Conclusion: The reported novel anatomic titanium mesh cage (NTMC) significantly improved the anti-subsidence performance after ACCF, which was approximately 51.3% higher than that of the traditional titanium mesh cage.