A Novel Adaptive Sliding Mode Controller for a 2-DOF Elastic Robotic Arm

Abstract

Collaborative robots (or cobots) are robots that are capable of safely operating in a shared environment or interacting with humans. In recent years, cobots have become increasingly common. Compliant actuators are critical in the design of cobots. In real applications, this type of actuation system may be able to reduce the amount of damage caused by an unanticipated collision. As a result, elastic joints are expected to outperform stiff joints in complex situations. In this work, the control of a 2-DOF robot arm with elastic actuators is addressed by proposing a two-loop adaptive controller. For the outer control loop, an adaptive sliding mode controller (ASMC) is adopted to deal with uncertainties and disturbance on the load side of the robot arm. For the inner loops, model reference adaptive controllers (MRAC) are utilised to handle the uncertainties on the motor side of the robot arm. To show the effectiveness of the proposed controller, extensive simulation experiments and a comparison with the conventional sliding mode controller (SMC) are carried out. As a result, the ASMC has a 50.35% lower average RMS error than the SMC controller, and a shorter settling time (5% criterion) (0.44 s compared to 2.11 s).

Improving robotic hand control via adaptive Fuzzy-PI controller using classification of EMG signals

“…Hence, they are not reasonable solutions for commercialization. Adaptive sliding mode [63] is a complex method to handle models with two degrees of freedom, with the ability to be adapted online. It is an appropriate method for managing uncertainties, but it is not a reliable solution to grasp different objects without training.…”

From Rigid to Hybrid/Soft Robots: Exploration of Ethical and Philosophical Aspects in Shifting from Caged Robots to Human-Robot Teaming

“…Besides softening the interaction force by designing soft joints from a mechanical perspective, imposing desired behaviour on the robot can also be done from the software Fig. 2: A soft robotic arm is in a compressed state due to the collision with the environment [9] side [13]. To achieve this, in [14], Hogan presented two concepts, i.e.…”

Fractional order adaptive sliding mode control method of manipulator

“…To overcome the limitations of a single control method, combining the SMC method with various intelligent control methods has emerged as an important research direction. For example, combining impedance control [3] , high-order super distortion control [4] , fuzzy control [5] , adaptive control [6,7], etc., can effectively reduce the generation of chattering. However, compared to integer order control, research has found that introducing fractional calculus theory into sliding mode control theory can greatly improve the degree of freedom of controller design, making the design more flexible [8] .…”