A new non-magnetic trimmer for the magnetic resonance imaging system

Self Cite

Using Radio Frequency (RF) waves, magnetic resonance imaging (MRI) systems can make detailed images of human organs for accurate diagnostic processes and disease detection. The overhaul of certain electronic components has become necessary to keep up with the progress of MRI systems. Among the components responsible for image quality, the adjustable non-magnetic capacitors, also called trimmers, are of great importance. The purpose of this paper is to suggest a new design of a trimmer using non-magnetic materials, able to hold a high voltage ( >3 kV) and reach a resonance frequency above 100 MHz. Constructional analysis performed on existing commercial trimmers, combined with the electrical Finite Element Method, were carried out to propose a prototype matching the desired specifications. A dielectric shield surrounding the electrodes was sized to ensure voltage withstand. Moreover, the rotor and the worm-and-gear set were joined together to combat the vibrations generated by the MRI system. The present study includes the modelling step of the component by numerical simulation, the manufacturing, the electrical performance characterization, and the mechanical solution for tuning capacitance. The final prototype combines electrical performance corresponding to the required specifications in particular a high breakdown voltage (39.7 kV) and a resonance frequency (130 MHz).

Section: Materials Choicementioning

confidence: 99%

Section: Materials Choicementioning

confidence: 99%

Section: Prototypingmentioning

confidence: 99%

Section: Introductionmentioning

confidence: 99%

See 2 more Smart Citations

FEM simulation‐based development of a new tunable non‐magnetic RF high voltage capacitor for the new generation of MRI

Jebri

Bord‐Majek

Bardet

et al. 2022

Self Cite

“…The dielectric part of the trimmer, including its nature, shape, and air gap, is crucial in improving the operating voltage and avoiding electric discharge [1][2][3]. Dielectric breakdown occurs when the electrical field exceeds the dielectric strength of the material, resulting in partial ionization [4,5].…”

Section: Introductionmentioning

confidence: 99%

Investigating the effects of uniaxial pressure on the preparation of MgTiO₃–CaTiO₃ ceramic capacitors for MRI systems

Jebri,

Taleb Ali,

Bord Majek

2023

Self Cite

Today's healthcare system relies on magnetic resonance imaging (MRI) for early diagnosis and treatment planning. For open MRI systems to achieve resolutions of about a hundred microns, a high voltage is required, as well as a specialized power supply. Negative–positive–zero (NP0) ceramic is selected for the fabrication of adjustable capacitors. Specifically, it stands for which is a classification based on the temperature coefficient of capacitance (TCC) of the ceramic material used in the capacitor. NP0 capacitors have a TCC of 0 ±30 ppm/°C, which means that their capacitance value does not change significantly with temperature and frequency. They are known for their stability and low losses, making them ideal for applications that require high accuracy and reliability, such as timing circuits for radio frequency (RF) applications. Here, MgTiO3–CaTiO3 ceramic is used to make an adjustable capacitor with desired properties for MRI systems. To enhance the dielectric properties of MgTiO3 ceramics, CaTiO3 was added in varying concentrations. After pressing and sintering, the resulting samples were tested using a vector network analyzer in the frequency range of 10–130 MHz. The adjustable capacitor fabricated using high co‐fired NP0 ceramic may have been used for MRI applications such as tuning circuits and matching networks, where precise capacitance values and low loss are critical. MRI systems with resonance frequencies of 128 MHz require trimmers with ceramic cores (VBreakdown = 3 kV @ 128 MHz, Cmin = 3 pF, CMax = 30 pF, and Cvariation step = 1.5 pF).

Advancing MRI capacitors: Design, fabrication, and characterization

Jebri,

Ali,

Juergen

2024

Self Cite

In today's healthcare landscape, MRI (magnetic resonance imaging) plays a pivotal role in early diagnosis and treatment decisions. However, the quest for higher frequencies to achieve micron‐level resolutions poses technological challenges. This paper focuses on coils and capacitors, with special attention to air gap considerations for movable electrodes. The paper delves into the development of adjustable capacitors using high‐fired NP0 ceramic, tailored for 128‐MHz MRI systems. These capacitors boast impressive specs: a 3‐kV breakdown voltage (VBreakdown), a 3‐pF minimum capacitance (Cmin), a 30‐pF maximum capacitance (CMax), and a 1.5‐pF stepwise capacitance variation (Cvariation step). Notably, they enhance breakdown voltage while preserving frequency stability with MgTiCa ceramic between the fixed and mobile electrode, critical for adaptive blocks. Leveraging geometrical parameters analyzed through the ANSYS simulator, the authors meticulously designed an optimized 25–40 pF capacitor with a 15‐mm height and 1600 mm2 surface area. Post‐fabrication and sintering, extensive testing using a vector network analyzer across 10 MHz to 100 MHz validated performance against simulated expectations.