A New Calculation Model for Equivalent Circulating Density Considering Interface Effect between Various Fluids during Cementing Process

Abstract

Summary Equivalent circulating density (ECD) is an essential parameter in the construction of oil and gas wells, which can be used to control the downhole pressure and prevent serious incidents such as well leakage or blowouts. Different engineering tasks will lead to changes in the ECD calculation model; the classical pipe flow theory can be used to calculate the ECD of circulating drilling fluid, but it is not suitable for the cementing displacement because it does not consider the interface effect between various fluids. In this paper, a new ECD calculation model has been developed that accounts for the changes in fluid interface morphology between displacing fluid and displaced fluid during the cementing process. Moreover, a simulation of the effects of borehole radius, casing eccentricity, displaced fluid density, and flow rate on the ECD were analyzed and quantified by a numerical approach to solve the fluid dynamics equilibrium equations that describe the flow in the eccentric annuli based on the semi-implicit method for pressure-linked equations (SIMPLE) algorithm. The results show that the calculated ECD predicted by the proposed model is larger than the traditional model with the reduction in the borehole radius, and the maximum deviation at the inlet position can reach 0.03 g·cm−3. Variation in the length of the interface transition zone is the main reason for the deviation in ECD prediction accuracy. In the case of constant casing outer diameter, fluid rheology, and displaced fluid density, the ECD decreases with increasing borehole radius. Meanwhile, it increases with higher displaced fluid density, eccentricity, and annular velocity. It is also shown that the length of the mixing zone can reach up to 40% of the pipe length under the conditions of eccentricity and displacement described in the paper. The proposed model predicts the ECD in the annulus by considering the influence of different engineering parameters on the movement of displacement interface, which can effectively ensure the safety of the cementing operation.