A New Approach for Efficiently Evaluating Highly Permeable Coalbed Methane Reservoirs in Surat Basin, Australia

Abstract

Following the first commercial recovery of coal-seam gas (CSG) in the 1990s, the CSG industry in Queensland has grown rapidly due to the abundant reserves (~33 000 PJ) and global demand for LNG. There are currently three LNG export projects under construction on Curtis Island near Gladstone in Queensland, with the first shipment scheduled for middle to late 2014. In preparation for the completion of the first LNG plant, the QCLNG project, operated by QGC, is currently ramping up CSG production in the Surat basin. By the end of 2014, more than 2000 wells will be drilled and connected to the QGC gas-and-water-gathering network, and thousands more are scheduled for drilling and completion in subsequent years of the project. To meet the production target, it is increasingly important for QGC to accurately evaluate the well productivity during the early stage of development to optimise the operation of the field and ensure all LNG contractual agreements are met. To date, drillstem testing (DST) has been the most common form of evaluating CSG well productivity. However, the improved capabilities of the wireline formation tester (wireline FT) for testing larger coal intervals (between 1 and 15 m) and deriving similar reservoir parameters is making it a popular alternative to the more costly DST. Nevertheless, although facing very few issues in low-permeability coal seams, the wireline FT is unable to create sufficient pressure drawdown in higher permeability coal seams (>100 md) due to the mechanical limit of its downhole pump (<20 B/D). As a result, the wireline FT interval pressure builds up to formation pressure rapidly and stabilises to gauge resolution within the first few minutes. This causes significant uncertainty in the permeability measurement. In view of these wireline FT limitations, operators have been more inclined to evaluate the higher-permeability coal intervals with DST services, therefore motivating wireline service providers to find ways of improving wireline FT capability This paper describes utilising super flow technique to create sufficient drawdown in highly permeable coals using wireline FT sample chamber module. Superflow simulates closed-chamber DST by using the high volume sample chamber module of the wireline FT tool. Two different superflow techniques have been implemented with positive results. Several superflow tests were compared with conventional drawdown/build-up tests over a number of coal intervals of varying permeability to confirm the validity of the new testing method. The results indicate this technique has extended the wireline FT capabilities to higher permeability coals that have been typically conducted by DST services. The addition of the sample chamber module and corresponding superflow theory, the wireline FT has broadened the range of CSG applications.