A Multidirectional Triple-Band Rectenna for Outdoor Rf Energy Harvesting From Gsm900/Gsm1800/Umts2100 Toward Self-Powered Iot Devices

Abstract

Due to low power density, it is difficult for a single-band rectenna to harvest enough power for IoT devices like wireless sensors. Thus to supply these consuming devices, harvesting RF energy from multiple frequencies is a solution to enhance the amount of harvested DC power. In this work, we introduce a triple-band rectenna, working at 900 MHz, 1.8 GHz, and 2.1 GHz, three readily available bands in the ambience, for energy harvesting application. The proposed rectenna consists of three monoband rectifiers connected to a multi-band receiving antenna via a highly efficient triplexer. The antenna is made by superposing two concentric rings and manipulating their radii to achieve the desirable operating frequencies, with antenna gains of respectively 2.5 dBi, 4.5 dBi, and 4 dBi. The contiguous triplexer is made by connecting open stubs band-reject filters and optimizing their positions, resulting in the triplexing efficiency higher than 75%. The measured RF-DC efficiency under −10 dBm triple-tone input power is 40%.

Dual-band ambient energy harvesting systems based on metamaterials for self-powered indoorwireless sensor nodes

“…For dual-band rectenna, there are two ways to rectify the received RF power, either by using two single-band rectifiers or using just one dual-band/wide-band rectifier. The first method may result in bulkier size [12,25,26] and therefore not suitable to use in compact wireless sensor nodes. In this study, a dual-band rectifier will be employed.…”

Design and Implementation of Multi-Band Fractal Slot Antennas for Energy Harvesting Applications

“…Some of the previously reported antenna are operating at a single frequency band [3][4][5]. In addition, triple-band antennas have been widely reported in the literature with the aim to increase the overall system efficiency and reduce the rectifier complexity [6][7][8][9].…”