A multi‐module microfluidic platform for continuous pre‐concentration of water‐soluble ions and separation of oil droplets from oil‐in‐water (O/W) emulsions using a DC‐biased AC electrokinetic technique

Abstract

A novel continuous flow microfluidic platform specifically designed for environmental monitoring of O/W emulsions during an aftermath of oil spills is reported herein. Ionized polycyclic aromatic hydrocarbons which are toxic are readily released from crude oil to the surrounding water phase through the smaller oil droplets with enhanced surface area. Hence, a multi-module microfluidic device is fabricated to form ion enrichment zones in the water phase of O/W emulsions for the ease of detection and to separate micron-sized oil droplets from the O/W emulsions. Fluorescein ions in the water phase are used to simulate the presence of these toxic ions in the O/W emulsion. A DC-biased AC electric field is employed in both modules. In the first module, a nanoporous Nafion membrane is used for activating the concentration polarization effect on the fluorescein ions, resulting in the formation of stable ion enrichment zones in the water phase of the emulsion. A 35.6% amplification of the fluorescent signal is achieved in the ion enrichment zone; corresponding to 100% enrichment of the fluorescent dye concentration. In this module, the main inlet is split into two channels by using a Y-junction so that there are two outlets for the oil droplets. The second module located downstream of the first module consists of two oil droplet entrapment zones at two outlets. By switching on the appropriate electrodes, either one of the two oil droplet entrapment zones can be activated and the droplets can be blocked in the corresponding outlet.

Electropreconcentration‐induced local pH change

“…As a strategy for detecting trace level of samples, various methods have been developed for sample preconcentration . Among these, the ion‐permselective nanochannel‐based sample preconcentration or electropreconcentration has received considerable attention due to advantages including ease of implementation and high trapping efficiency with charged molecules .…”

Rapid pre‐concentration of Escherichia coli in a microfluidic paper‐based device using ion concentration polarization

“…ICP is an ionic transport phenomenon which occurs near perm selective membrane (i.e. Nafion ® ) under the presence of a DC electric field by the formation of an ion depletion zone and an ion enrichment zone . Under the DC electric field, ions tend to move towards either cathode or anode.…”

“…Also, these methods require handling large quantities of media and other solutions during the process of cell enumeration which end as biological waste . Under such circumstances, microfluidic devices become a viable solution by offering advantages like reduced sample quantities, reduced assay time, and portability . Up to date, several microfluidic devices have been proposed for the detection of E. coli based on cell capturing with aid of various biological receptors or cell amplification.…”

Continuous flow microfluidic cell inactivation with the use of insulating micropillars for multiple electroporation zones

“…Apart from the voltage requirement, these bulk electroporation devices cannot do single‐cell handling and manipulations . Nowadays, microfluidics has a wide range of applications because it can provide precise control of experimental conditions . Microfluidic devices allow isolation, trapping, merging, and electroporation of a single cell.…”