A Model for Analyzing a Five-Phase Fractional-Slot Permanent Magnet Tubular Linear Motor with Modified Winding Function Approach

Abstract

This paper presents a model for analyzing a five-phase fractional-slot permanent magnet tubular linear motor (FSPMTLM) with the modified winding function approach (MWFA). MWFA is a fast modeling method and it gives deep insight into the calculations of the following parameters: air-gap magnetic field, inductances, flux linkages, and detent force, which are essential in modeling the motor. First, using a magnetic circuit model, the air-gap magnetic density is computed from stator magnetomotive force (MMF), flux barrier, and mover geometry. Second, the inductances, flux linkages, and detent force are analytically calculated using modified winding function and the air-gap magnetic density. Finally, a model has been established with the five-phase Park transformation and simulated. The calculations of detent force reveal that the end-effect force is the main component of the detent force. This is also proven by finite element analysis on the motor. The accuracy of the model is validated by comparing with the results obtained using semianalytical method (SAM) and measurements to analyze the motor’s transient characteristics. In addition, the proposed method requires less computation time.

Field Programmable Gate Array-Based Linear Shaft Motor Drive System Design in Terms of the Trapezoidal Velocity Profile Consideration

“…Linear motors of various types have been developed and investigated [1][2][3][4][5][6][7][8][9][10][11]. A shaft motor is a type of permanent magnet (PM) linear motor that consists of only windings and a non-magnetic pipe filled with PMs [1,4,6,7]. Simplification of the mechanism and light weighting of the forcer are the advantages of shaft motors.…”