A methodical approach for fabrication of binder-free Li2S-C composite cathode with high loading of active material for Li-S battery

Abstract

. (2016). A methodical approach for fabrication of binder-free Li2S-C composite cathode with high loading of active material for Li-S battery. Carbon, A methodical approach for fabrication of binder-free Li2S-C composite cathode with high loading of active material for Li-S battery AbstractLithium sulfide (Li2S), which has a theoretical capacity of 1166 mA h/g, is considered as a promising cathode material for the Li-S battery. The electrochemical performance of microsized Li2S is impaired, however, by its low electrical conductivity as well as first cycle high activation potential problem. In this work, microsized Li2S powder had been ball-milled with different carbon sources to synthesize Li2S-C composites as well as to find the suitable carbon sources, which were then capillary-deposited in three-dimensional multi-layered Ni foam from a dioxolane-containing mixture to fabricate a binder-free Li2S-C composite cathode. A large amount of active material (∼5 mg/cm2) was loaded in each cathode with the help of conventional capillary deposition method. Scanning electron micrographs show that the Li2S-C composite successfully fills the pores in the Ni foam through capillary action and maintains the integrity of the structure before and after cycling performance. Electrochemical performance testing shows that the capillary-deposited binder-free Li2S-C composite showed excellent cycling performance along with superior rate capability. For further improvement of electrochemical performance, a single-walled carbon nanotube free-standing layer was inserted in between the cathode and the separator which minimized polysulfides shuttle phenomenon thus improved the discharge capacity and the capacity retention. AbstractLithium sulfide (Li2S), which has a theoretical capacity of 1166 mAh/g, is considered as a promising cathode material for the Li-S battery. The electrochemical performance of microsized Li2S is impaired, however, by its low electrical conductivity as well as first cycle high activation potential problem. In this work, microsized Li2S powder had been ball-milled with different carbon sources to synthesize Li2S-C composites as well as to find the suitable carbon sources, which were then capillary-deposited in three-dimensional multi-layered Ni foam from a dioxolane-containing mixture to fabricate a binder-free Li2S-C composite cathode. A large amount of active material (~5 mg/cm 2 ) was loaded in each cathode with the help of conventional capillary deposition method. Scanning electron micrographs show that the Li2S-C composite successfully fills the pores in the Ni foam through capillary action and maintains the integrity of the structure before and after cyclingperformance. Electrochemical performance testing shows that the capillary-deposited binder-free Li2S-C composite showed excellent cycling performance along with superior rate capability. For further improvement of electrochemical performance, a single-walled carbon nanotube freestanding layer was inserted in between the cathode and the separator which ...

Graphene oxide-crowned poly(acrylonitrile)/sulfur as a lithium–sulfur battery cathode: performance and characterization

“…However, two disadvantages stand in the way of realizing its full potential in Li-S batteries. First, the poor electrical/ionic conductivity of the active elemental sulfur and the discharge product (Li 2 S/Li 2 S 2 ) severely hinders the full capacity utilization of the electrode [8]. Second, dissolution of intermediate long-chain polysulfides into the electrolyte and their shuttle between the cathode and the anode leads to fast capacity degradation and low coulombic efficiency [9].…”

“…Introduction of sulfur in the sulfur cathode composite can conveniently be controlled by low-cost and efficient solution-based processes. Kaiser et al reported that a large amount of active sulfur loading in sulfur based materials with the help of conventional capillary deposition method [6,8,10,15]. As a constituent of the composite, PAN helps in chemically bonding sulfur to the polymer and can help suppress polysulfide shuttling.…”

Synergistically Assembled Li2S/FWNTs@Reduced Graphene Oxide Nanobundle Forest for Free‐Standing High‐Performance Li2S Cathodes

“…To address these challenges, carbon‐based materials, such as graphene, carbon nanotubes (CNTs), and carbon obtained by pyrolysis of a polymer or grown via chemical vapor deposition, are commonly pursued . Among these carbon materials, graphene and CNTs have attracted significant attention due to their mechanical strength and superior electrical conductivity .…”

A mechanochemical synthesis of submicron-sized Li2S and a mesoporous Li2S/C hybrid for high performance lithium/sulfur battery cathodes

“…50 The originally better activation ability and the delithiation ability of the as-synthesized Li2S than those aforementioned Li2S is likely due to its originally small particle size. Moreover, Li2S…”