The aim of the study is melting the AlSi7Mg0.3 alloy chips, which are used in the production of automobile wheels, in sizes smaller and larger than 2 mm, in two different salt mixtures, at different ratios and by creating application differences, and to reveal the recovery and coagulation efficiency.
Low-pressure die casting was used to produce the wheel, and TGA was used to examine the oxidation behavior of the chips under temperature.
For a more efficient recycling, coarse and fine grains should be treated separately. Since the CaF2 solubility is higher in the ratio of 50:50 NaCl:KCl, it has a supporting effect in coagulation for the chips with a large surface area. It has been determined that the chips with a small surface area should be stirred in order to obtain suitable coagulation efficiency.
The study is important in terms of the use of AlSi7Mg0.3 alloy used in automobile wheels, thus assessing the aluminum recycling efficiency in the production of aluminum alloy wheels, which is increasingly play a role in the automotive industry.