A Hybrid Cooling Model Based on the Use of Newly Designed Fluted Conformal Cooling Channels and Fastcool Inserts for Green Molds

Abstract

The paper presents a hybrid cooling model based on the use of newly designed fluted conformal cooling channels in combination with inserts manufactured with Fastcool material. The hybrid cooling design was applied to an industrial part with complex geometry, high rates of thickness, and deep internal concavities. The geometry of the industrial part, besides the ejection system requirements of the mold, makes it impossible to cool it adequately using traditional or conformal standard methods. The addition of helical flutes in the circular conformal cooling channel surfaces generates a high number of vortexes and turbulences in the coolant flow, fostering the thermal exchange between the flow and the plastic part. The use of a Fastcool insert allows an optimal transfer of the heat flow in the slender core of the plastic part. An additional conformal cooling channel layout was required, not for the cooling of the plastic part, but for cooling the Fastcool insert, improving the thermal exchange between the Fastcool insert and the coolant flow. In this way, it is possible to maintain a constant heat exchange throughout the manufacturing cycle of the plastic part. A transient numerical analysis validated the improvements of the hybrid design presented, obtaining reductions in cycle time for the analyzed part by 27.442% in comparison with traditional cooling systems. The design of the 1 mm helical fluted conformal cooling channels and the use of the Fastcool insert cooled by a conformal cooling channel improves by 4334.9% the thermal exchange between the cooling elements and the plastic part. Additionally, it improves by 51.666% the uniformity and the gradient of the temperature map in comparison with the traditional cooling solution. The results obtained in this paper are in line with the sustainability criteria of green molds, centered on reducing the cycle time and improving the quality of the complex molded parts.

Characterization of Epoxy-Based Rapid Mold with Profiled Conformal Cooling Channel

“…The maximum outer diameter, minimum outer diameter, height, and thickness were 30 mm, 19.5 mm, 30 mm, and 2 mm, respectively. There are eight cross-sections of CCC [ 16 ], i.e., circular, rectangular, elliptical, square, semicircular, profiled, fluted, and water drop. In this study, two kinds of cross-sections of the CCC were used to study.…”

Effects of channel contour laser strategies on fatigue properties and residual stresses of laser powder bed printed maraging steel

“…Using SEM images and backscattered electrons it was possible to segment porosities from inclusions. 4 Results And Discussions 4.1 Roughness measurement AM process is known to create a roughness which depends on the inclination of the surface in relation with the building orientation [5]. The roughness of an upskin surface with already molten material underneath is smaller than that of a downskin surface that has an unfused powder bed underneath.…”

“…Metal AM technologies also offers the possibility of building hybrid molds [4,5,6], where an additively manufactured portion of the insert is built over of a prefabricated mold block. This means that only the parts were AM is required are manufactured using laser powder bed fusion (LPBF) [7], saving money by reducing the expensive manufacturing time (cf.…”

Effects of Different Mold Materials and Coolant Media on the Cooling Performance of Epoxy-Based Injection Molds

“…The cooling time of the wax patterns constitutes a large portion in cycle time. Nowadays, the conformal cooling channel (CCC) was incorporated in the wax injection mold to improve the cooling efficiency of the wax patterns in terms of uniform cooling during the cooling stage [1]. Low-pressure wax injection molding is one of the most widely used approaches for producing wax patterns, which can be used for investment casting [2] to manufacture metal components with intricate shapes [3].…”