The integration feasibility of two technologies including Miniaturized Hybrid Microwave Integrated Circuit (MHMIC) and Printed Circuit Board (PCB) are experimentally demonstrated at millimeter wave frequencies through the design of a switched beam antenna array. A 1 × 4 array of aperture coupled patch antennas etched on a RO5880 substrate is fed by a 4 × 4 butler matrix etched on a piece of high permittivity ceramic substrate. By using the proposed combined fabrication technologies, the feeding part on the ceramic substrate can be easily integrated with MMIC active component, while the radiation part is individually improved. Comparison of simulated and measured results show that the proposed switched beam antenna offers a −10 dB matching bandwidth of 6 GHz ranging from 58 GHz to 64 GHz and a multi beam radiation pattern which is focused in 45°, 15°, −15°, −45° directions. © 2016 Wiley Periodicals, Inc. Microwave Opt Technol Lett 58:1844–1847, 2016