A flow reactor setup for photochemistry of biphasic gas/liquid reactions

Abstract

SummaryA home-built microreactor system for light-mediated biphasic gas/liquid reactions was assembled from simple commercial components. This paper describes in full detail the nature and function of the required building elements, the assembly of parts, and the tuning and interdependencies of the most important reactor and reaction parameters. Unlike many commercial thin-film and microchannel reactors, the described set-up operates residence times of up to 30 min which cover the typical rates of many organic reactions. The tubular microreactor was successfully applied to the photooxygenation of hydrocarbons (Schenck ene reaction). Major emphasis was laid on the realization of a constant and highly reproducible gas/liquid slug flow and the effective illumination by an appropriate light source. The optimized set of conditions enabled the shortening of reaction times by more than 99% with equal chemoselectivities. The modular home-made flow reactor can serve as a prototype model for the continuous operation of various other reactions at light/liquid/gas interfaces in student, research, and industrial laboratories.

Aromatic Chlorosulfonylation by Photoredox Catalysis

“…The proposed mechanism was corroborated by DFT calculations and photochemical studies. This method is another example of the potential of chemical synthesis at the interfaces of three distinct physical entities: Visible light, a liquid phase, and a gaseous phase . Future efforts in our group will aim at the development of related multi‐component photocatalytic reactions with easily available gaseous reagents.…”

Metal‐Free Photocatalysts for C−H Bond Oxygenation Reactions with Oxygen as the Oxidant

“…[47] The key to this chemistry was the development of microflow setup for fast and efficient transformation. [47] The key to this chemistry was the development of microflow setup for fast and efficient transformation.…”

Photonic contacting of gas–liquid phases in a falling film microreactor for continuous-flow photochemical catalysis with visible light

“…Photocycloadditions were transferred from batch to continuous-flow mode proving the superior productivity of the flow reactors on the multi-gram scale. This reactor concept was then used as model 50 for a large number of custombuilt flow reactors for purely liquid or gas-liquid reactions like C-H functionalization of tertiary arylamines, 51 addition of glycosyl radicals into acrolein, 52 azide reduction and bromination of alcohols, 53 oxidative cyanation of amines, 54 the Stadler-Ziegler synthesis for aromatic C-S bond formation, 55 trifluoromethylation of heterocycles with gaseous ICF 3 , 56 or photooxygenation during juglone synthesis. 57 Tubular-based reactors enable segmented flow of gas and liquid slugs inside the channels or capillaries allowing efficient gas mass trans-fer into the liquid phase, while the reaction solution is fully illuminated.…”