A Feasibility Study to Reduce Infrasound Emissions from Existing Wind Turbine Blades Using a Biomimetic Technique

Abstract

Infrasound, i.e., low-frequency noise in the frequency range of 10–200 Hz, produced by rotating wind turbine blades has become a matter of concern because it is harmful to human health. Today, with the rapid increase of wind turbine size, this kind of noise is more worrying than ever. Although much effort has been made to design quiet wind turbine blades, today there is still a lack of effective techniques to reduce infrasound emissions from existing blades. To fill this gap in technology, a biomimetic technique that can be readily applied to reduce infrasound emissions of existing wind turbine blades is studied in this paper using both numerical simulation and experimental testing approaches. The numerical study of the technique is based on the analysis of the sound field distribution near the blade, which is derived by performing both aerodynamic and acoustic simulations of the blade. The experimental study of the technique is based on laboratory tests of two scale models of the blade. Both numerical and experimental studies have shown that the shedding vortices behind the blade can be successfully suppressed by semi-cylindrical rings wrapped on the blade. Consequently, both infrasound and the overall sound pressure level of the noise produced by the blade are significantly reduced. Although the rings fail to show good performance in reducing high-frequency noise, it is not a problem for human health because high-frequency noise is weak and moreover it attenuates rapidly as distance increases. The research also showed that the proposed technique can, not only reduce the infrasound produced by the blade, but can also improve the power coefficient of wind turbines.

Nature-Inspired Designs in Wind Energy: A Review

“…Lv et al [148] investigated the feasibility of reducing infrasound emissions from existing wind turbine blades using a biomimetic technique. The proposed technique was inspired by the leading-edge tubercles on the fin of humpback whales, the trailing-edge profile of bird wings, and the strips on the body surface of beetles.…”

Enhancing Efficiency and Reliability of Tidal Stream Energy Conversion through Swept-Blade Design

“…This implies that biomimetic features may exhibit distinct functionalities when the turbine operates under different operating conditions. On the other hand, to mitigate the detrimental emission of infrasound from rotating wind turbine blades, a wind turbine blade with semi-cylindrical rings was studied in [21], drawing inspiration from the body features of beetles. The results from both numerical and experimental studies have shown that the application of semi-cylindrical rings not only reduced the infrasound emission by 8.3% but also led to an increase in the power coefficient C p of the wind turbine to varying extents at different TSRs.…”