A Controlled Material Flow Forming Mechanism of Curve Cutter Forging in The Hot Impression Forging of The Medical Instrument

Abstract

In this study, a forming process during producing medical surgery curve cutter stapler would be tentatively as well as numerically investigated and validated by the simulations. The reasons for the investigation are to find the critical technology of the forming process and to understand this medical tool head forming within the forming process associated with medical surgery curve cutter stapler and improve the traditionally forming process. Moreover, to understand the medical tool head forming, the novel forging process, and the parting line approach are offered and simulated by the FE software QForm, the method data on the medical tool head forging are investigated and compared with the experimental analysis. According to the outcomes of the simulations, the distributions of the forming process, some parameters have been gotten to explain and improve these microscopic phenomena. The precision of the numerical patterns has been confirmed by comparing them with the test dimensions. The offered revised model from the forming preform has been submitted to achieve an alike forging condition when reducing manufacturing cost After the improved method, measure the shrinkage width of the workpiece. Compared with the product of the traditional process, the widest area is 6.37mm shrink to 6.29mm. The shrinkage is about 1%. Compared with the previous result is 5%, the improvement plan has been optimized the outcomes very much.