A Comparative Study of Film Cooling Effectiveness on a Flat Plate With Adiabatic and Conjugate Conditions for Different Hole Shapes

Abstract

A computational study is carried out for comparison of the effectiveness of film cooling through holes of different shapes: cylindrical, shaped, trenched cylindrical and trenched shaped hole. Both adiabatic and conjugate wall thermal condition with various blowing ratios (0.6 to 1.4) are considered for the investigation. The coolant-to-mainstream density ratio and temperature ratio are maintained at 1.6 and 0.625 respectively. The κ-ω SST turbulence model is used for computation. The complex flow structures within the film hole, the exit and in the interaction zone of jet with cross flow are reported. Among the configurations studied, the shaped and trenched shaped holes have shown smaller jet lift off and uniform coolant coverage in both lateral and streamwise directions. Further, the results showed a significant difference in the indicated values of centerline surface temperature and effectiveness with the adiabatic and the conjugate conditions; the conjugate values being much lower but more uniform.