A comparative study of epitaxial InGaAsBi/InP structures using Rutherford backscattering spectrometry, X-ray diffraction and photoluminescence techniques

Sharpe, Matthew; Marko, Igor P.; Duffy, Dominic A.; England, Jonathan; Schneider, E.; Kesaria, Manoj; Fedorov, Vladimir V.; Clarke, Edmund M.; Tan, Chee Hing; Sweeney, S. J.

doi:10.1063/1.5109653

Cited by 2 publications

(1 citation statement)

References 36 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…While there has been significant effort in growth and material characterization of In y Ga 1-y As 1-x Bi x , the effects on dark current and responsivity brought upon by the low growth temperature is not well understood [39]. Similarly, a systematic investigation on the low temperature grown InGaAs devices using MBE has not yet been undertaken.…”

Section: Introductionmentioning

confidence: 99%

Electrical and optical characterisation of low temperature grown InGaAs for photodiode applications

Lim

Patil

Marko

et al. 2020

Semicond. Sci. Technol.

Self Cite

View full text Add to dashboard Cite

Dilute bismide and nitride alloys are promising semiconductors for bandgap engineering, opening additional design freedom for devices such as infrared photodiodes. Low growth temperatures are required to incorporate bismuth or nitrogen into III-V semiconductors. However, the effects of low growth temperature on dark current and responsivity are not well understood. In this work, a set of InGaAs p-i-n wafers were grown at a constant temperature of 250, 300, 400 and 500 °C for all p, i and n layers. A second set of wafers was grown where the p and n layers were grown at 500 °C while the i-layers were grown at 250, 300 and 400 °C. Photodiodes were fabricated from all seven wafers. When constant growth temperature was employed (for all p, i and n layers), we observed that photodiodes grown at 500 °C show dark current density at -1 V that is 6 orders of magnitude lower while the responsivity at an illumination wavelength of 1520 nm is 4.5 times higher than those from photodiodes grown at 250 °C. Results from the second set of wafers suggest that performance degradation can be recovered by growing the p and n layers at high temperature. For instance, comparing photodiodes with i-layers grown at 250 °C, photodiodes showed dark current density at -1 V that is 5 orders of magnitude lower when the p and n layer were grown at 500 °C. Postgrowth annealing, at 595 °C for 15 minutes, on the two wafers grown at 250 and 300 °C showed recovery of diode responsivity but no significant improvement in the dark current. Our work suggests that growth of the cap layer at high temperature is necessary to maintain the responsivity and minimise the dark current degradation, offering a pathway to developing novel photodiode materials that necessitate low growth temperatures.

show abstract

Section: Introductionmentioning

confidence: 99%