A Client's Fit for Purpose Solutions in Well Abandonment

Abstract

Typically, most of the well abandonment practice is reference to the recognized industry standards i.e. NORSOK, UK Oil & Gas and etc, and this is how the wells abandonment was carried out in the past. These practices however evolved/changed over time with lessons learnt and experiences and turn into a fit for purpose solutions for the Client. The shift in international and local standards and regulations for a robust plug and abandonment approach has placed the need for a better and long lasting permanent P&A methodology. Adhering to the existing industry standards in well abandonment is somehow not practical and not cost effective to be implemented in different part of the well, where there are major differences in local regulations, reservoir conditions, caprock thickness, well design philosophy and etc. The magnitude of abandonment cost increase is not at par with the risk reduction in long term hydrocarbon leakage. A fit for purpose solutions is recommended in closing the gap between cost and risk. Due to the extremely varied well architecture between wells, the approach to permanent abandonment varies depending on casing sizes, presence of packers and no of casings present to the caprock area. On top of that, identifying the highest depth for a placement of cement plug will reduce on the amount of plugs to be placed, saving rig time and operational time. So far, 16 idle wells have since been permanently abandoned with the systematic approach of applying caprock restoration concept and reinstating the poor isolation across caprock areas with cement with the assistance of technology to the likes of perf-wash-cement, and hydro mechanical casing cutter. These wells have successfully been abandoned as per host authority standards. This paper will explore a major local oil company’ approach to decommissioning of wells, in line with local regulations enforced, while ensuring a cost effective approach is applied in line with the available technologies.