A Broadband Dual-Polarized Printed Antenna

Abstract

Abstract-A low-profile broadband dual-polarized antenna with high isolation and low cross polarization is presented in this letter. The proposed antenna employs two different feeding mechanisms. On one hand, two out-of-phase probes loaded with two small circular patches make the proposed antenna operate in horizontal mode. On the other hand, two pins connecting two eyebrow-shaped patches and the ground form a magnetic loop which enables the proposed antenna to achieve vertical polarization. By elaborately adjusting the feeding structures, measurements demonstrate that the proposed antenna not only achieves 10-dB return loss bandwidths of 49% (1.7-2.8 GHz) and 28% (2-2.65 GHz) for port 1 and port 2, respectively, but also maintains a high isolation better than 32 dB over the entire common frequency band. Meanwhile, within the main lobes, the cross polarization levels, both in E-plane and in H-plane, stay lower than −25 dB for port 1 and −20 dB for port 2. In addition, the proposed antenna with a profile of 0.13λ 0 achieves the maximum gains of 8.4 dBi for horizontal polarization and 8.2 dBi for vertical polarization.

A Broadband Dual-Polarized Magneto-Electric Dipole Antenna for 2g/3g/Lte/Wimax Applications

“…Patch antenna is a good choice for base station antennas, due to its attractive features such as light weight, low costs, and easy fabrication for dual-polarization implementation. The patch antenna type has already been studied a lot [2][3][4][5][6][7], but wide impedance bandwidth is very difficult to be achieved with these antennas.…”