A Body Failure Model With a Notch Based on the Scalable Linear Parameter

Abstract

Berto F., Glagolev V.V., Markin A.A. A Body Failure Model with a Notch Based on the Scalable Linear Parameter // Вестник Пермского национального исследовательского политехнического университета. Механика.Based on the concept of the interactive layer (IL), the paper considers the deformation of a body with a thin deep notch in a linearly elastic formulation. The stress state in the interactive layer is determined on the basis of the constitutive relations of the Prandtl bonds type. The proposed formulation of the task explicitly includes a linear parameter (LP). Based on the analytical solution of the task in the beam approximation, the dependence of the wedge force on the thickness (IL) is obtained. The use of the classical strength criteria in this dependence leads to a zero critical force at zero thickness IL, which contradicts the Griffith-Irvin criterion. We use it as a universal criterion for the destruction of the energy product (EP), as a product of a linear size and an increase in the specific free energy of the layer is shown. A relationship is established between the dimensions of the sample and the critical force, which ensures independence with a given degree of accuracy of the critical force from the thickness IL. By comparing the solution obtained and the classical solution for the notch in the form of a mathematical cut, the assumptions under which EP criterion and the Griffith's criterion (GC) coincide are determined. By using the Neuber-Novozhilov approach, the structural volume of the material with averaged characteristics of the stress-strain state (SSS) is identified. This volume is considered as a representative volume for determining the increment of еру average free energy that controls the state of pre-destruction. The product of the increment of the average free energy and LP determines the average EP. The expression for the average EP is determined on the basis of the obtained analytical solution. It is shown that the transition to the averaged value of the EP on a square Neuber cell does not lead to an increase in the margin of error in determining the critical force. It has been established that starting with a certain value of LP, which depends on the geometric characteristics of the damaged body, the convergence of the average EP in the pre-destruction zone to the GC takes place with a specified degree of accuracy. © PNRPU Keywords:quasi-brittle failure, linear size, pre-failure zone, energy product.