3d Pre-Stack Depth Migration: A Tool for Reducing Exploration Risk in the Swan Graben, Timor Sea

Abstract

3D pre-stack depth migration (PSDM) reprocessing was conducted in 2003 on a portion of the Onnia 3D seismic cube, located in exploration permit AC/P-21, Timor Sea.The main objective of the reprocessing was to obtain the best seismic depth image and the most realistic structural reconstruction of the sub-surface to mitigate the risk factors associated with trap definition (trap retention and trap efficiency). This represents one of the main challenges for oil exploration in the area.The 3D PSDM methodology was chosen as the most appropriate imaging tool to define the correct sub-surface geometry and fault imaging through the use of an appropriate velocity field. An integrated approach to building the final velocity model was adopted, with a substantial contribution from the regional geological model.Several examples are given to demonstrate that the 3D PSDM reprocessing significantly improved the seismic image and thus the confidence in the interpretation, contributing strongly to the definition of the exploration targets.The interpretation of the new seismic data has resulted in a new structural picture in which higher confidence in seismic imaging has improved fault correlation. This has enabled better structural definition at the Middle Jurassic Plover Formation level that has reduced the complexity of the large Vesta Prospect, in the centre of the Swan Graben to the northwest of East Swan–1. Improved understanding of the fault reactivation mechanism and the structural elements of the trap (trap integrity) were eventually incorporated in the prospect risking.In the Swan Graben 3D PSDM has proved to be a very powerful instrument capable of producing significant impact on the exploration even in an area with a complex geological setting and a fairly poor seismic data quality.