Highly Enhanced H2 Sensing Performance of Few-Layer MoS2/SiO2/Si Heterojunctions by Surface Decoration of Pd Nanoparticles

Abstract

A novel few-layer MoS2/SiO2/Si heterojunction is fabricated via DC magnetron sputtering technique, and Pd nanoparticles are further synthesized on the device surface. The results demonstrate that the fabricated sensor exhibits highly enhanced responses to H2 at room temperature due to the decoration of Pd nanoparticles. For example, the Pd-decorated MoS2/SiO2/Si heterojunction shows an excellent response of 9.2 × 103% to H2, which is much higher than the values for the Pd/SiO2/Si and MoS2/SiO2/Si heterojunctions. In addition, the H2 sensing properties of the fabricated heterojunction are dependent largely on the thickness of the Pd-nanoparticle layer and there is an optimized Pd thickness for the device to achieve the best sensing characteristics. Based on the microstructure characterization and electrical measurements, the sensing mechanisms of the Pd-decorated MoS2/SiO2/Si heterojunction are proposed. These results indicate that the Pd decoration of few-layer MoS2/SiO2/Si heterojunctions presents an effective strategy for the scalable fabrication of high-performance H2 sensors.Electronic supplementary materialThe online version of this article (10.1186/s11671-017-2335-y) contains supplementary material, which is available to authorized users.

Chemiresistive Hydrogen Sensors: Fundamentals, Recent Advances, and Challenges

“…In addition, the Pd NP/MoS 2 composites showed a high H 2 selectivity against NH 3 , acetone (CH 3 COCH 3 ), and ethanol (C 2 H 5 OH) (Figure 24e), although the concentration of NH 3 (50 ppm) was different to other gas molecules (5%). This study demonstrated the feasibility of Pd/MoS 2 composites for H 2 sensors and stimulated the development of various Pd/TMD composites for H 2 sensors, such as Pd/MoS 2 , 249,255 Pd/ WS 2 256 , and Pd/SnO 2 /MoS 2 257 . These Pd/TMD composites showed interesting and efficient H 2 sensing properties.…”

“…Table summarizes the sensing performances of TMD-based H 2 sensors operated at RT in air. ,,− ,− Their sensing properties are inferior to other sensing materials, such as Pd and metal oxides. However, since TMDs have various fascinating features as chemical sensors, such as high surface area, 2D structure, tunable electrical properties, and operation at RT, , we expect that the TMD-based H 2 sensors can grow rapidly in the future.…”

Ultra-Sensitive Photo-Induced Hydrogen Gas Sensor Based on Two-Dimensional CeO2-Pd-PDA/rGO Heterojunction Nanocomposite

“…Many different sensing technologies have been developed for H 2 sensing [ 7 , 8 , 9 ] and semiconductor-based H 2 sensors mainly present high sensitivity, quick response, and good stability based on their physical and electrochemical characteristics [ 10 , 11 , 12 , 13 , 14 ]. Commonly, the exceptional physical, optical, and electrical properties of 2D semiconductors, such as high surface to volume ratios and numerous active sites, lead to promising gas sensing performance (i.e., gas selectivity, excellent response, durability, and quick response and recovery) because of a change in charge density concentration near or on the sensing layer [ 15 , 16 , 17 , 18 ].…”

Investigation of Stability and Power Consumption of an AlGaN/GaN Heterostructure Hydrogen Gas Sensor Using Different Bias Conditions

“…Semiconductor-based gas sensors have the benefits of low cost, small size, and low power consumption. Various semiconductor materials have been utilized to implement hydrogen sensors [4][5][6][7][8][9][10], among which GaN is an attractive material for a hydrogen sensor operating at high temperatures because of its wide energy bandgap with low intrinsic carrier density [11][12][13]. The low intrinsic carrier density allows GaN to maintain its semiconductor properties in high-temperature environments.…”