Strain-induced ferroelectricity and lattice coupling in BaSnO₃and SrSnO₃

Abstract

Perovskite stannates such as BaSnO and SrSnO exhibit promising photovoltaic properties, and hold promise for application in solar cell devices. However, the lack of ferroelectricity and the wide band gap in these materials limit their potential for photovoltaic applications. Here, by first-principles calculations, we demonstrate the realization of a primary ferroelectric polarization in non-ferroelectric BaSnO and SrSnO through strain engineering. In addition to the appearance of polarization, the band gaps of the materials are greatly narrowed when the paraelectric to ferroelectric phase transition takes place under compressive strain. Furthermore, an intriguing Q mode triggered by lattice coupling with the polar mode is found in the stannates subjected to a sufficient tensile strain and this mode has a significant effect on the band gap, which suggests another pathway to narrow the band gap through the electric field control of the Q mode. The fruitful electronic, structural, and energetic properties are discussed in detail to achieve a fundamental understanding of the strain-induced ferroelectricity, tunable band gap, and lattice couplings between the Q mode and different polar/rotational distortions in the perovskite stannates.

Energy Harvesting Research: The Road from Single Source to Multisource

“…Meanwhile, the bandgap of the KNbO 3 was further reduced by 0.6 eV when subject to a −2% in‐plane strain . Similar phenomena were also observed in other compositions such as BaSnO 3 and SrSnO 3 , where tensile strain induced a significant bandgap narrowing effect (from 3 to 2–2.8 eV) …”

“…Apart from the effort made to reduce the BFO's bandgap, bandgap engineering has also been applied to other compositions. There are two effective methods reported for bandgap engineering of the ferroelectric materials—polarization rotation associated with phase change or strain and compositional modification via, for example, doping . Wang et al studied the bandgap engineering of seven types of ferroelectric crystals including LaScO 3 , BT, BaZrO 3 , PbTiO 3 , KTaO 3 , KNbO 3 , and WO 3 .…”

Functional Oxides for Photoneuromorphic Engineering: Toward a Solar Brain

“…Thus, the population structure can be captured by looking at the pairwise interactions between neurons. Many functional oxide properties (ferroelectricity in particular) depends precisely either in nanoscale correlation and atomic collective behavior which may also be induced by/to adjacent materials and interfaces [889] , [890] , [891] , [892] , [893] . In a Hebbian view [894] , synaptic efficacy arises from a presynaptic cell's repeated and persistent stimulation of a postsynaptic cell.…”

Ferroelectricity and Large Piezoelectric Response of AlN/ScN Superlattice

“…A similar enhancement in piezoelectric properties is well-known for ferroelectric perovskites near to the phase-transition region 37,38 . We also mentioned that epitaxial strain has been intensively studied both theoretically and experimentally for inducing ferroelectricity in paraelectric perovskites 39,40 and rock-salt non-ferroelectric materials 41 .…”