2-D high-frame-rate dynamic elastography using delay compensated and angularly compounded motion vectors: Preliminary results

Abstract

This paper describes a new ultrasound-based system for high-frame-rate measurement of periodic motion in 2-D for tissue elasticity imaging. Similarly to conventional 2-D flow vector imaging, the system acquires the RF signals from the region of interest at multiple steering angles. A custom sector subdivision technique is used to increase the temporal resolution while keeping the total acquisition time within the range suitable for real-time applications. Within each sector, 1-D motion is estimated along the beam direction. The intra- and inter-sector delays are compensated using our recently introduced delay compensation algorithm. In-plane 2-D motion vectors are then reconstructed from these delay-compensated 1-D motions. We show that Young's modulus images can be reconstructed from these 2-D motion vectors using local inversion algorithms. The performance of the system is validated quantitatively using a commercial flow phantom and a commercial elasticity phantom. At the frame rate of 1667 Hz, the estimated flow velocities with the system are in agreement with the velocity measured with a pulsed-wave Doppler imaging mode of a commercial ultrasound machine with manual angle correction. At the frame rate of 1250 Hz, phantom Young's moduli of 29, 6, and 54 kPa for the background, the soft inclusion, and the hard inclusion, are estimated to be 30, 11, and 53 kPa, respectively.

Electromechanical wave imaging for arrhythmias

“…Sector-based sequencing consists of dividing the image into sectors, which are then acquired multiple times before acquiring the next. This method is widely used for blood flow estimation, strain-rate imaging (Heimdal et al, 1998) and, more recently, for the estimation of the tissue motion for steady-state periodic excitations (Baghani et al, 2010; Azar et al, 2010). However, it remains limited in terms of frame rate when imaging in a full field of view of the heart.…”

Single-heartbeat electromechanical wave imaging with optimal strain estimation using temporally unequispaced acquisition sequences

“…When using RF cross-correlation, only two consecutive pulses are necessary to provide a high accuracy estimate of motion, leading to a four- to five-fold increase in the motion-sampling rate, field of view or beam density. Such an approach has been described as ‘sector-based sequencing’ and recently used for steady-state periodic excitations (Baghani et al, 2010; Azar et al, 2010). …”

Shear wave Vibro Magneto Acoustography for measuring tissue mimicking phantom elasticity and viscosity

“…An interface software system was developed in C++ and Qt 4. To achieve a high temporal resolution, a sector subdivision technique was employed [14]. Each of the sectors had four lines acquired using a pulse repetition frequency of 2 kHz, resulting in 32 sectors and the final frame composed of 128 scan lines.…”