Vibrations of beams with a variable cross-section fixed on rotational rigid disks

Abstract

The work is focused on the problem of vibrating beams with a variable cross-section fixed on a rotational rigid disk. The beam is loaded by a transversal time varying force orthogonal to an axis of the beam and simultaneously parallel to the disk's plane. There are many ways of usage of the technical moveable systems composed of elements with the variable cross-sections. The main applications are used in numerous types of turbines and pumps. The paper is a kind of introduction to the dynamic analysis of above mentioned beam systems. The equations of motion of rotational beams fixed on the rigid disks were derived. After introducing the Coriolis forces and the centrifugal forces, the transportation effect in the mathematical model was considered. This particular project is the first stage research, where there were proposed certain solutions of problems connected with the linear variable cross-sections systems. The further investigation considering the nonlinear systems has been proceeding. The results, analysis and comparison will be presented in the future works.

Applying the Anticipatory Failure Determination at a Very Early Stage of a System’S Development: Overview and Case Study

“…The analysis presented is part of a larger project, and the system under evaluation is the result of the application of ARIZ for finding methods of reducing fuel consumption in ships. Searching for potential failure can be supported by means of specialised software such as the aforementioned Ideation Failure Analysis TM and Ideation Failure Prediction TM (Kaplan et al, 1999), as well as on the basis of different physical chemical, biological, geometrical, and even psychological effects (AULIVE, 2017;Bejger and Gawdzińska, 2011;Boratyńska-Sala, 2016;Oxford Creativity 2017;Pajor et al, 1999;Zaplata and Pajor, 2016;Zolkiewski 2013). The ranking of the identified failures can also be made using various methods, including in addition to the aforementioned assessment matrix, a weighted average as well as methods based on direct comparisons of failure-related values of individual assessments, and the importance of individual evaluation criteria.…”

Response characteristics of non-uniform beam with time-dependent boundary conditions and under the actions of travelling distributed masses

“…Using equations (11) in the non-homogeneous boundary conditions (9) and (10) one obtains the homogeneous boundary conditions.…”

“…The problem of assessing the dynamic response of a structural elements (beam or plate) which supports moving loads is fundamental in the analysis and design of high way and railway bridges and as such this problem continues to attract the attention of research engineers in the field of civil, mechanical, aerospace, transport engineering and related fields [1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16].…”

Modeling of Complex Properties of Vacuum Packed Particles Using Evolutionary Algorithms

“…Especially interesting seems to be the application of the considered granular system as a part of controllable damping strategy for slender objects vibrations [14], [15] or as a semi-active pedestrian protection system component during collision [16]. Although the design of VPP's appears to be extremely easy, the mathematical modeling of such systems is quite sophisticated.…”