A B S T R A C TThe use of vegetable fiber residue in cementitious matrices can be a sustainable technological alternative; however, it still has problems related to the chemical compatibility between the cement and the fibers. The present study evaluated the compatibility of vegetable fibers with cement using three methods of calculation and determined certain physical properties of the fibers and the curve of the temporal evolution of temperature for each composite. The surfaces of the composites were evaluated through atomic force microscope images and the results showed that the pretreatment of fiber washing significantly favors the compatibility with cement for fibers of eucalyptus, coconut and cocoa, with no influence for water hyacinth fiber. Bivariate correlation analyses showed that the compatibility of the composites is favored by the reduction in the degree of swelling, packing density and specific mass. The results showed that there is a potential use of plant fiber in civil construction and that the physical properties of each type of fiber can offer elements for its selection and pretreatment.Compatibilidade de fibras vegetais com cimento Portland e sua relação com as propriedades físicas
R E S U M OA utilização de resíduos de fibras vegetais em matrizes cimentícias pode ser uma alternativa tecnológica sustentável porém ainda apresenta problemas relacionados com a compatibilidade química entre o cimento e a fibra. No presente trabalho foi estudada a compatibilidade de resíduos de fibras vegetais com cimento por três métodos de cálculo e determinadas as propriedades físicas das fibras, além de obtida a curva da evolução temporal da temperatura para cada compósito. Foi analisada a superfície dos compósitos a partir de imagens obtidas em microscópio de força atômica cujos resultados indicaram que o tratamento prévio de lavagem da fibra favorece significativamente a compatibilidade com cimento das fibras de eucalipto, coco e de cacau, não tendo influência para a fibra de baronesa; as análises de correlações bivariadas apontam um favorecimento da compatibilidade dos compósitos com a diminuição dos valores de grau de inchamento, densidade pacote e massa específica; os resultados comprovaram que existe um potencial de utilização da fibra vegetal na construção civil e que as propriedades físicas de cada tipo de fibra podem oferecer elementos para sua seleção e pre-tratamento.