Optimization of coconut osmotic drying preceded by microwave treatment by Response Surface Methodology

Abstract

Osmotic dehydration is an intermediate stage in drying processes in which water is extracted using a hypertonic solution, but it is a slow process, especially in hard foods such as coconut. Microwaves use an electromagnetic field which can raise the temperature in the depth of samples as a result of friction, which facilitates mass transfer due to molecular expansion and increased porosity. The aim of this study was to investigate the effect of a microwave pre-treatment on the quality of the osmotic drying of coconut and optimize the whole process by response surface methodology (RSM). The independent variables were the microwave power (X1), the sugar solution concentration (X2) and the duration of the process (X3.). The responses (dependent variables) were the moisture content difference (MD), weight reduction (WR), water loss (WL) and solids gain (SG). The results showed that the linear terms of X2and X3 had significant effects on all the dependent variables but the linear term of X1 only significantly affected WL, SG and WR (p< 0.05). The interaction of X1X2 significantly affected WL and WR and the interaction of X2X3 significantly affected all the dependent variables, but the interaction of X1X3 only significantly affected MD (p < 0.05). On the other hand, X22 significantly affected SG and WR (p < 0.05). The two-factor model (2FI) was able to express the changes in MD and WL, but only the quadratic model adequately fitted SG and WR, the determination coefficients being 0.98, 0.99, 0.99 and 0.99 respectively. Finally, the optimized condition was obtained with a power of 900 watts, concentration of 47.80% and duration of 5 hours.

Process optimization for dehydration of shelled peas by osmosis and three‐stage convective drying for enhanced quality

“…Out of the several drying methods, hot air convective drying is most commonly used to preserve fruits and vegetables, etc., but it has certain disadvantages with regard to dried product quality such as high shrinkage, lower rehydration ratio (RR) along with undesirable changes in color, texture, and nutritional value. Hence, the food technologists have been exploring novel technologies to improve the quality of dried products (Salimi & Hoseinnia, 2020).…”

Osmotic dehydration of fruits using unconventional natural sweeteners and non‐thermal‐assisted technologies: A review

“…The inside of the material gets very hot due to substantial fluctuations of polar molecules, particularly water, inside the microwave oven, and the resulting product is more expanded and porous due to steam migration from the inside to the outside. Osmotic dehydration can be improved by microwave pre‐treatment (Salimi & Hoseinnia, 2020) (Table 3).…”

Optimization of factors influencing osmotic dehydration of aonla (Phyllanthus emblica L.) segments in salt solution using response surface methodology

“…The mass transfer parameters i.e., water loss (WL) and solid gain (SG) reflecting as one of the quality attributes of aonla during osmosis. The rate of water loss during osmotic dehydration depends upon the solution temperature, solution concentration, and immersion time Salimi et al, 2020;Pinto et al, 2021;Zeghbib et al, 2022).…”