Numerical study of upstream disturbances on the performance of electromagnetic and ultrasonic flowmeters

Abstract

Electromagnetic and ultrasonic flowmeters are high precision devices that can measure the water flow in pressurized irrigation networks. In these networks, the inadequate installation distance of flow control valves generates upstream disturbances which will increase measurement errors and reduce the accuracy of the equipment. Therefore, estimating these errors is important to establishing the correct installation distance of the hydraulic accessories and to ensuring the metrological reliability of the flowmeters. This work proposes a numerical study using Computational Fluid Dynamics to evaluate water flow behavior in pipes and estimate measurement errors caused by gate and butterfly valves in installation configurations found at pressurized irrigation networks. The numerical simulations were made for gate (15, 50 and 75 % closed) and butterfly (open and 30º closed) valves installed three and six diameters (3D and 6D) from the flowmeters. The numerical study with three-dimensional simulation allows for evaluating the flow behavior and estimating measurement errors correctly. According to the study, the installation configurations of the gate and butterfly valves change the flow velocity profile at different positions in the pipe, generating both positive and negative measurement errors at both flowmeters. Among the tested configurations, only the butterfly valve installed 3D and 6D from the electromagnetic flowmeter ensured the measurement accuracy required by ISO 4064.

A study on structure improvement scheme of electromagnetic flow sensor for slurry flow measurement

“…In order to prevent the flow rate from being unstable, it is necessary to reserve a long enough straight pipe length upstream of the sensor installation position. 38,39 The two sensors adopt the same converter, by comparing the measurement waveforms of the improved sensor and the traditional sensor, it is verified that the improved sensor can better overcome the influence of slurry noise on the measurement signal.…”

Smart water meter for automatic meter reading

“…Velocity flow meter include electromagnetic and ultrasonic meter. Electromagnetic meter is based on Faraday's law that states variation in time of magnetic flux enclosed by the conductive loop generated electromotive magnetic force (EMF) or voltage [11]. The generated voltage is proportional to fluid velocity.On the other hand, ultrasonic technologies are used for volumetric flow measurement, including transmit time meters and Doppler effect meters [12].…”

Ultrasonic Technique for Measuring the Mean Flow Velocity Behind a Throttle: A Metrological Analysis

“…Qin et al [10] suggested an intelligent approach to flow profile recognition for multipath ultrasonic flowmeters relying on support vector machines to improve measurement accuracy. Palau et al [11] introduced a numerical analysis using CFD to examine pipeline water flow patterns and quantify monitoring errors introduced by different valves in pressurized pipe networks. Different settings of the gate and butterfly valves mounted on 3DN, and 6DN m from the flowmeters were numerically simulated.…”