Numerical analysis of combined optimization of turbine runner flow pattern and shafting System

Abstract

This paper attempts to solve the turbine failures reported by a hydropower station, namely, the violent vibration in the runner region under a special working condition and the blade cracking on the outlet edge near the lower ring. For this purpose, the entire flow channel of the turbine was simulated by computational fluid dynamics (CFD) on ANSYS, and the runner strength and mode of shaft assembly system (SAS) were computed by the liquid-solid coupling algorithm. The calculation results show that severe low (negative) pressure appeared on the outlet edge near the lower ring, excess stress was observed in that area, and the resonance occurred as the fifth and sixth order natural frequencies of the SAS were the same with the rotation frequencies of the blade. On this basis, the original blade was modified repeatedly. Through the modification, the flow field distribution in the runner region and the blade strength were both greatly improved, and the SAS natural frequencies were kept away from the various external excitation frequencies, laying a solid basis for the safe and stable operation of the turbine.