This study aimed to find relationships between the properties of beeswax-based oleogels and the type of oil used. The influence of linseed, sunflower, olive, and fish oils was studied. For these oils, the fatty acid composition, the content of total polar components, and the iodine value were characterized. Textural and thermodynamic properties were determined for oleogels, the oil-binding capacity was estimated, and the morphology of crystals was studied. The concentration of beeswax in all oleogels was 6.0% w/w. It was shown that the type of oil has a significant influence on all characteristics of the oleogels. The use of different oils at the same technological treatment leads to the formation of crystals of diverse morphology—from platelets to spherulites. At the same time, it was revealed that some characteristics of oils have a varying contribution to the properties of oleogels. The content of total polar materials in oils is associated with a decrease in strength parameters (yield value and elastic modulus) and the oil-binding capacity of oleogels. In its turn, the iodine value of oils has a close positive correlation with the melting and crystallization temperatures of oleogels. The results obtained in this article indicate that the properties of beeswax-based oleogels can be directed by changing the oil composition.
The objective of this work was the fractionation of beeswax to investigate the phase behavior of binary blends of the fractions and their potential use as gelling agents in edible oleogels. We have extracted seven distinctive fractions, using preparative flash chromatography with eluents permitted to be used in the processing of food raw materials. The odor profile of the fractions was characterized. The high purity of collected fractions was shown through thin‐layer chromatography, Fourier‐transform infrared spectroscopy, and high‐performance liquid chromatography with an evaporative light scattering detector methods for hydrocarbons (94.8%), monoesters (97.6%), and mixed mono‐, di‐, and triesters fraction (98.7%). Free fatty acids and fatty alcohol fractions had lower purity which equals 82.6% and 39%, respectively. The analysis of the binary pseudo phase diagram revealed that all fractions combined with hydrocarbons express eutectic behavior. Combinations of all other fractions resulted in the formation of solid solutions. This study shows that the texture of oleogels can be improved by using a combination of various fractions of beeswax instead of native wax.
Ensuring the microbiological safety of food products is a problem of current interest. The use of antimicrobial packaging materials is a way of solving the problem. When developing packaging materials, it is advisable to use a modern approach based on the creation of biodegradable materials. The difficulty in the selection of the polymer compositions’ components lies in solving the dilemma of the joint introduction and processing of antimicrobial and biodegradable agents. The studies of the ultrasound treatment on the melts of polymer mixtures showed an increase in the dispersion process of the components of the mixture. In this regard, this work aimed to study the effect of the ultrasonic treatment on the melts of polymer compositions containing thermoplastic starch and birch bark extract (BBE). In the work, the properties of PE-based packaging materials with various BBE concentrations obtained with ultrasonic treatment of melts on a laboratory extruder were studied. Biodegradable polymer compositions containing thermoplastic starch and BBE, obtained with the use of the ultrasonic treatment during extrusion, were investigated. The methods for studying rheological, physic-mechanical, antimicrobial properties and sanitary chemical indicators of materials were used in the article. It was found that ultrasonic treatment increases the melt flow and contributes to the production of materials with the uniform distribution of additives. The BBE content from 1.0% and higher in the contents of the material provides antimicrobial properties. When studying the permeability of oxygen and water vapor of the polymer compositions based on PE and BBE, it was found that the introduction of a filler increases vapor permeability by about 8–12% compared with control samples. The optimal concentration of BBE in polyethylene compositions containing thermoplastic starch was determined. The extension of the shelf life of the food product during storage in the developed material was established.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.