ABSTRACT:Intercalated nanocomposites of poly(ethylene terephthalate) (PET) and layered silicate (ME) were prepared by a two-step polymerization process: a melt polymerization of bis(2-hydroxyethyl)terephthalate and a subsequent solid-state polymerization. Two kinds of cationic surfactants, dodecyltriphenylphosphonium bromide (C 12 TP) and 10-[3,5-bis(methoxycarbonyl)phenoxy]decyltriphenylphosphonium bromide (IP10TP) were employed as compatibilizers. The dispersibility of ME in PET was investigated by X-Ray diffraction analysis and optical polarization microscopy. The thermal and dynamic mechanical behavior of the nanocomposites was compared with that of pure PET and a PET/ME composite. By utilizing IP10TP as the compatibilizer, better dispersion of ME into the PET matrix could be achieved. The obtained PET/IP10TP/ME nanocomposite showed a higher tensile storage modulus compared with those of pure PET, PET/ME, and PET/C 12 TP/ME, especially in the temperature range above the glass transition temperature.KEY WORDS Nanocomposites / Poly(ethylene terephthalate) / Layered Silicates / Compatibilizer / Dynamic Mechanical Property / Much attention has been paid to polymer/layered silicate nanocomposites because remarkable improvements can be expected in mechanical, thermal, and physicochemical properties over their base polymers or conventional composites. 1-4 Development of poly(ethylene terephthalate) (PET)/layered silicate nanocomposites is highly desired because of their practical importance. [5][6][7] We have recently reported the preparation of PET/expandable fluorine mica (ME) nanocomposites via an in-situ polymerization method utilizing a novel reactive compatibilizer, 10-[3,5-bis(methoxycarbonyl)phenoxy]decyltriphenylphosphonium bromide (IP10TP, Scheme 1). 8 The obtained nanocomposites showed a high flexural modulus compared with that of pure PET. However, the molecular weight of PET in the nanocomposites was found to be low for practical applications, probably due to the high viscosity during the melt polymerization. A solid-state polymerization (SSP) process can be applied to increase the average molecular weight of PET without being affected by the viscosity of the reactants. [9][10][11] In the SSP process, the crystallized PET prepolymer is heated at a temperature below the crystalline melting point (T m ) but well-above the glass transition temperature (T g ) under a flow of inert gas or under vacuum. The hydroxyethyl end groups of the PET prepolymer are considered to be concentrated into the amorphous region during the crystallization process. The transesterification reaction between the chain ends leads to the high-molecular-weight PET.In the present study, we applied the SSP process to prepare PET/IP10TP/ME nanocomposites with a suitable molecular weight. A PET/ME composite with dodecyltriphenylphosphonium bromide (C 12 TP, Scheme 1) was prepared in order to determine the effect of the functional groups of IP10TP on the final properties of the PET nanocomposites. Pure PET and a PET/ME composite without ...
Subjective ratings of pure tones at low and infrasonic (3–40 Hz) were obtained on a set of semantic-differential-type scales and were analysed by factor analysis. From the results, it was concluded that there are three main factors in the human response to the stimulus sound, these are 1) sound pressure, 2) vibration, and 3) loudness. In order to predict the human responses from the physical variables of the sound stimuli, prediction equations were derived for each of the three factors. Also, equal sensation contours for the factors were obtained. From these results, a new evaluation method for the psychological effects is proposed, which considers the multidimensional aspects of human perception at loww and infrasonic frequencies.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.