Metamaterials based on effective media can be used to produce a number of unusual physical properties (for example, negative refraction and invisibility cloaking) because they can be tailored with effective medium parameters that do not occur in nature. Recently, the use of coding metamaterials has been suggested for the control of electromagnetic waves through the design of coding sequences using digital elements ‘0’ and ‘1,' which possess opposite phase responses. Here we propose the concept of an anisotropic coding metamaterial in which the coding behaviors in different directions are dependent on the polarization status of the electromagnetic waves. We experimentally demonstrate an ultrathin and flexible polarization-controlled anisotropic coding metasurface that functions in the terahertz regime using specially designed coding elements. By encoding the elements with elaborately designed coding sequences (both 1-bit and 2-bit sequences), the x- and y-polarized waves can be anomalously reflected or independently diffused in three dimensions. The simulated far-field scattering patterns and near-field distributions are presented to illustrate the dual-functional performance of the encoded metasurface, and the results are consistent with the measured results. We further demonstrate the ability of the anisotropic coding metasurfaces to generate a beam splitter and realize simultaneous anomalous reflections and polarization conversions, thus providing powerful control of differently polarized electromagnetic waves. The proposed method enables versatile beam behaviors under orthogonal polarizations using a single metasurface and has the potential for use in the development of interesting terahertz devices.
Alzheimer’s disease is the primary cause of dementia worldwide, with an increasing morbidity burden that may outstrip diagnosis and management capacity as the population ages. Current methods integrate patient history, neuropsychological testing and MRI to identify likely cases, yet effective practices remain variably applied and lacking in sensitivity and specificity. Here we report an interpretable deep learning strategy that delineates unique Alzheimer’s disease signatures from multimodal inputs of MRI, age, gender, and Mini-Mental State Examination score. Our framework linked a fully convolutional network, which constructs high resolution maps of disease probability from local brain structure to a multilayer perceptron and generates precise, intuitive visualization of individual Alzheimer’s disease risk en route to accurate diagnosis. The model was trained using clinically diagnosed Alzheimer’s disease and cognitively normal subjects from the Alzheimer’s Disease Neuroimaging Initiative (ADNI) dataset (n = 417) and validated on three independent cohorts: the Australian Imaging, Biomarker and Lifestyle Flagship Study of Ageing (AIBL) (n = 382), the Framingham Heart Study (n = 102), and the National Alzheimer’s Coordinating Center (NACC) (n = 582). Performance of the model that used the multimodal inputs was consistent across datasets, with mean area under curve values of 0.996, 0.974, 0.876 and 0.954 for the ADNI study, AIBL, Framingham Heart Study and NACC datasets, respectively. Moreover, our approach exceeded the diagnostic performance of a multi-institutional team of practicing neurologists (n = 11), and high-risk cerebral regions predicted by the model closely tracked post-mortem histopathological findings. This framework provides a clinically adaptable strategy for using routinely available imaging techniques such as MRI to generate nuanced neuroimaging signatures for Alzheimer’s disease diagnosis, as well as a generalizable approach for linking deep learning to pathophysiological processes in human disease.
The concept of coding metasurface makes a link between physically metamaterial particles and digital codes, and hence it is possible to perform digital signal processing on the coding metasurface to realize unusual physical phenomena. Here, this study presents to perform Fourier operations on coding metasurfaces and proposes a principle called as scattering‐pattern shift using the convolution theorem, which allows steering of the scattering pattern to an arbitrarily predesigned direction. Owing to the constant reflection amplitude of coding particles, the required coding pattern can be simply achieved by the modulus of two coding matrices. This study demonstrates that the scattering patterns that are directly calculated from the coding pattern using the Fourier transform have excellent agreements to the numerical simulations based on realistic coding structures, providing an efficient method in optimizing coding patterns to achieve predesigned scattering beams. The most important advantage of this approach over the previous schemes in producing anomalous single‐beam scattering is its flexible and continuous controls to arbitrary directions. This work opens a new route to study metamaterial from a fully digital perspective, predicting the possibility of combining conventional theorems in digital signal processing with the coding metasurface to realize more powerful manipulations of electromagnetic waves.
Coding metasurfaces, composed of an array of coding particles with discrete phase responses, are encoded with predesigned coding sequences to manipulate wavefronts of electromagnetic (EM) waves and realize novel functionalities such as anomalous beam deflection, broadband diffusion, and polarization conversion. Such a new concept can be viewed as a bridge linking metamaterial and digital codes, yielding the investigation of metamaterials from a digital perspective and eventually the realization of real-time control of EM waves. Here, we propose and experimentally demonstrate a transmission-type coding metasurface to bend normally incident terahertz beams in anomalous directions and generate nondiffractive Bessel beams in normal and oblique directions. To overcome the larger reflection and strong Fabry−Perot resonance that usually originate from a thick silicon substrate, a free-standing design is presented for the coding particle, which is formed by stacking three metallic layers with four polyimide spacers alternately. Experimental results show that the fabricated sample could bend the normally incident terahertz wave to anomalous refraction angles of 26°and 58°with 58% and 40% efficiencies, respectively. Owing to the excellent mechanical and chemical properties of polyimide, the fabricated sample is extremely flexible and stable, implying promising applications in terahertz imaging and communication.
The naturally occurring water has frequency dispersive permittivity at microwave frequencies and thus is a promising constituent material for broadband absorbers. Here, we develop water as the dielectric spacer in the substrate of metal-backed metamaterial (MM) absorbers. The designed substrate is a hybrid of water and a low-permittivity dielectric material. Such a design allows tight packaging of water and easy fabrication of the absorber. We obtain broadband absorption at temperatures of interest by designing the hybrid substrate and MM inclusions. Additionally, the absorption performance of the water-substrate MM absorbers could be tunable according to the environment temperature. We experimentally demonstrate the broadband and thermally tunable absorption performance. We expect that water could replace dielectric layers in other structural MM absorbers to achieve the broadband and thermally tunable absorption performance.
We investigate the conversion from cylindrical waves to plane waves in a short range through a metamaterial layer which has a circular shape in the inner outline and a square shape in the outer outline. Based on an embedded optical transformation, analytical formulas of the permittivity and permeability tensors are presented for the metamaterial layer which converts the cylindrical waves to plane waves. The designed conversion materials are validated by full-wave simulations using the finite-element method. The proposed structure can be used either as a four-beam antenna or a compact range for near-field measurement of plane waves.
Recently, invisible cloaks have attracted much attention due to their exciting property of invisibility, which are based on a solid theory of transformation optics and quasi-conformal mapping. Two kinds of cloaks have been proposed: free-space cloaks, which can render objects in free space invisible to incident radiation, and carpet cloaks (or ground cloaks), which can hide objects under the conducting ground.The first free-space and carpet cloaks were realized in the microwave frequencies using metamaterials.The free-space cloak was composed of resonant metamaterials, and hence had restriction of narrow bandwidth and high loss; the carpet cloak was made of non-resonant metamaterials, which have broad bandwidth and low loss. However, the carpet cloak has a severe restriction of large size compared to the cloaked object. The above restrictions become the bottlenecks to the real applications of free-space and carpet cloaks. Here we report the first experimental demonstration of broadband and low-loss directive free-space cloak and compact-sized carpet cloak based on a recent theoretical study. Both cloaks are realized using non-resonant metamaterials in the microwave frequency, and good invisibility properties have been observed in experiments. This approach represents a major step towards the real applications of invisibility cloaks.PACS numbers. 41.20.Jb, 42.25.Gy, 42.79.-e * tjcui@seu.edu.cn 2 Recently, a new theory of transformation optics and quasiconformal mapping has been proposed to design the electromagnetic metamaterials to control the paths of electromagnetic waves [1,2,4]. Based on the physical principle, an electromagnetic wave will always travel in the quickest route between two points. In a homogeneous and isotropic material, the route is a straight line. In an inhomogeneous material, the route becomes nonlinear to make the total traveling time be minimal because the wave travels at different speeds inside. Hence one can control the route of wave by designing the material parameters, which has found a lot of potential applications such as cloaking objects invisible [1][2][3][4][5][6][7], concentrating of electromagnetic waves [8,9], rotating of electromagnetic waves [10], bending of electromagnetic waves [11], and forming multi-beam antennas [12]. Artificial metamaterials provide flexible choices of the designed parameters.Among above potential applications, the invisibility cloak is the most attractive. There have been two kinds of invisibility cloaks proposed: free-space cloaks and carpet cloaks. A free-space cloak is a designed material shell covering an object in free space, which can guide the waves to propagate around the shell, making the object inside invisible [1]. The theoretical tool to study invisible cloak is the so-called transformation optics [13], which is based on the coordinate transformation [14]. An optical conformal mapping method was used to design the material parameters that create perfect invisibility [1,2], in which the permittivity tensor ǫ and the permeability ten...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.